Instruction manual

FEATURES
o
- Adjustable swivel head (Pan 180 , Tilt +/-15")
- 75mm or 100mm VESA compatible
- Die cast and aluminum construction
- Cable feed-through to conceal wiring
- 1,1/4" NPT standard pipe
- Maximum load 20 lbs (9.0kg)
USE
ASSEMBLY
HCS775 Mount
Light Duty Ceiling LCD Mount Bracket
15", 17", 19", 20.1" LCD Monitors
The bracket is designed for industry standard LCD monitors.
The mount is intended for use in ceiling mount applications.
The ceiling mounting plate (1) must be attached to a structural object such as hard wood, ceiling rafter or
concrete that will support the weight of the mount and monitor. The mounting plate may be attached using
the M6 x 35 (3X) or substitute hardware as required providing a secure attachment.
The VESA plate must be attached to the ball socket stem using the two M5 x 16L machine screws and tooth
washers.
NOTE: PROPER ORIENTATION OF THE BALL-SOCKET ASSEMBLY IS REQUIRED FOR CEILING
INSTALLATION.
IMPROPER INSTALLATION WILL BREAK THE SOCKET AND MAY CAUSE THE MONITOR TO FALL.
Check if the installation requires ceiling mounting of the LCD. The orientation of the ball socket to ball
socket adapter may be changed by unscrewing the Allen screw inside the adapter, repositioning the adapter
to the top or side position on the socket and reattaching the adapter to the socket.
Tighten the inside Allen screw firmly.
If ceiling mount is required, ensure the ball socke
Attach the extended length of pipe to the 1,1/2" ceiling mount (1). Attach the VESA plate (2) to the back of
the LCD monitor using the four M4 x 8L machine screws. Both 75mm and 100mm VESA mounts are
accommodated.
t is orientated in a "C" shape with the ball socket adapter
located at the 12:00 o'clock position(Vertical direction) in relationship to the ball socket.
(See ceiling mount configuration)
24