Instruction manual

PHOTO INPUT

This monitor can be turned off and goes to power saving mode if there is low ambient light by

setting PHOTO INPUT to "ON".

Use the following steps to set the PHOTO INPUT option.

STEP

ACTION

Press MENU and then move the horizontal bar to CONFIGURATION using

or .

Press or to display sub-menu of CONFIGURATION.

Locate horizontal bar at PHOTO INPUT and then select ON of OFF using

or .

- ON : The monitor turns off when ambient light is low.

- OFF : The monitor doesn't go to low power mode.

Press MENU to go to the previous menu or exit from the OSD menu.

RECALL

This option allows you to return the unit to factory-defined defaults.

Some items do not go to factory default values.

STEP

ACTION

Press MENU and then move the horizontal bar to CONFIGURATION using

or .

Press MENU and then move the indication bar to CONFIGURATION

using or .

Press or to display sub-menu of CONFIGURATION.

Locate horizontal bar at RECALL and then select ON using or .

Press MENU to make the monitor factory default state.

AUTO POWER

This option is used to turn the monitor on and off automatically at ON TIME and OFF TIME.

Use the following steps to adjust the ON and OFF TIME.

Move the indication bar to AUTO POWER and select ON or OFF using or .

Move the indication bar to ON TIME or OFF TIME using or .

Press MENU to display the previous OSD window or exit from the OSD.

Select one of the option using or .

Adjust the selected option using or .