Instruction manual

PIP SIZE
The PIP window size can be adjusted by using the PIP SIZE menu option.
Larger PIP window sizes can be obtained by increasing the PIP SIZE value.
PIP H&V POS
The PIP window can be displayed in any position on the screen by adjusting these options.
The PIP position is dependent on the PIP size, so care must be exercised not to display PIP
window beyond the border of the screen.
PIP CAMERA
This option is used to select which camera is designated as the PIP window.
If CA1 is designated as the PIP window, CA2 will be the Main window.
This option is only applied on SCREEN MODE 2 & 3.
Use the following steps to set PIP options.
STEP
ACTION
1
2
Press MENU and then move the horizontal bar to PIP option using or .
Press or to display sub-menu of PIP.
3
Select the option to be adjusted using or .
4
Adjust the option selected using or .
5
Press MENU to go to the previous menu or exit from the OSD menu.
CONFIGURATION
CONFIGURATION
VIDEO SYSTEM NTSC
PHOTO INPUT OFF
RECALL OFF
AUTO POWER OFF
ON TIME 09:00:00
OFF TIME 18:00:00
18
VIDEO SYSTEM
Select the video system that is used in your region.
Use the following steps to set the video system.
STEP
ACTION
1
2
Press MENU and then move the horizontal bar to CONFIGURATION using
or .
Press or to display sub-menu of CONFIGURATION.
3
Locate horizontal bar at VIDEO SYSTEM and then select NTSC or PAL
using or .
4
Press MENU to go to the previous menu or exit from the OSD menu.