Instruction manual

CAMERA ADJUSTMENT

CAMERA ADJUST

The picture quality of each camera can be adjusted by using the CAMERA ADJUST setup menu.

This setup menu is composed of 7 options.

CAMERA CA1

CONTRAST 25

BRIGHTNESS 25

COLOR 25

TINT * 25

SHARPNESS 01

SEQUENCE 03 SEC

*) Tint is only activated in NTSC system.

SEQUENCE

This option is used to set the dwell time of the selected camera when the monitor is operated in

the SEQUENCE mode. The picture sequences in the order of CA1, CA2, CA1, CA2.. by pressing

the SEQUENCE button on the remote control.

Use the following steps to set the picture quality of each camera and other options.

STEP

ACTION

Press MENU and then move the horizontal bar to CAMERA ADJUST using

or .

Press or to display sub-menu of CAMERA ADJUST.

Locate the horizontal bar at CAMERA and then select the camera to be

adjusted using or .

Select the option to be adjusted using or .

Adjust the option selected using or .

- Only the picture quality of the selected camera is adjusted.

Press MENU to go to the previous menu or exit from the OSD menu.

PIP ADJUSTMENT

PIP

This setup menu is used to adjust the PIP position and size.

PIP SIZE 00

PIP H POS 008

PIP V POS 005

PIP CAMERA CA2