User Instructions COLOR TFT-LCD MONITOR 20.1 INCH TFT-LCD MONITOR 20.1 INCH TFT-LCD PUBLIC VIEW MONITOR M201SB-WDR Please read this manual thoroughly before use and keep it handy for future reference.
LIMITATION OF LIABILITY THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES.
WARNINGS AND CAUTIONS: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. 10. POWER CORDS -- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 2. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. 11. HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment. 3.
TABLE OF CONTENTS CHAPTER 1. FEATURES 7 DESCRIPTION 7 FEATURES 7 ACCESSORIES 7 CHAPTER 2. FRONT AND REAR PANEL 8 THE FRONT PANEL 8 THE REAR PANEL 9 CHAPTER 3. REMOTE CONTROL 10 CHAPTER 4. SETUP MODE 11 OVERVIEW 11 OSD WINDOW OF MAIN MENU 11 SELECTING SCREEN MODE 12 MOTION SETUP 13 TIME/DATE 14 PICTURE ADJUSTMENT 15 CAMERA TITLE 16 CAMERA ADJUSTMENT 17 PIP ADJUSTMENT 18 CONFIGURATION 18 ADJUSTING OSD WINDOW 20 CHAPTER 5. TROUBLESHOOTING 21 CHAPTER 6.
CHAPTER 1. FEATURES DESCRIPTION The 20.1" Color TFT-LCD Monitor can display up to two video sources. The monitor features built-in video motion detection (VMD) allowing the monitor image to switch to one or both of the camera images which contains motion. The monitor provides five display modes including full-screen (CAM1 or CAM2), picture-inpicture (PIP) mode and picture-by-picture (PBP) mode. All monitor programming is accomplished via an IR remote control.
CHAPTER 2. FRONT AND REAR PANEL THE FRONT PANEL B Part Function A IR / LIGHT SENSOR B INTEGRATED CAMERA A Description Remote control sensor / Light sensor for detecting ambient light. Integrated camera window.
THE REAR PANEL A B C D E F L CA1 IN CA2 IN CA1 OUT CA2 OUT R AUDIO MAIN DC 12V IN DC 12V OUT < 20.1 Inch TFT-LCD Monitor > A B G H E CA2 IN/OUT CA1 OUT MAIN F L DC 12V IN DC 12V OUT R AUDIO < 20.1 Inch TFT-LCD Public View Monitor > FUNCTION PART LABEL A DC 12V IN Connect the adapter jack to the DC power connector on the back of the monitor B DC 12V OUT DC output connector for an external camera.
CHAPTER 3. REMOTE CONTROL 1. Mute Cuts off the sound. 2. Zoom Not available. 3. 4. 5. 10 VCR Not available. 11 Up/Down Keys Moves up/down in the OSD menu. Increases/decreases audio volume. 1 CA1 CA2 CA3 1 2 3 4 5 6 7 8 CA4 FREEZE CAPTURE 13 VCR VOLUME 3 4 MENU 5 14 SEQUENCE 6. 7. QUAD Changes the picture display mode on the screen. POP Not available. 9. S-Video Not available. 15 16 QUAD 6 VOLUME REPLAY HISTORY DISPLAY 17 Display Displays setup information. 8.
CHAPTER 4. SETUP MODE OVERVIEW All functions are controlled via the supplied remote control. Pressing the MENU button places the unit into the programming mode. In the programming mode, the arrow buttons are used to move the cursor DOWN, UP, LEFT and RIGHT in the OSD Setup menu. The selected values are saved when exiting the OSD menu. OSD WINDOW OF MAIN MENU MAIN MENU SCREEN MODE MOTION SET TIME/DATE PICTURE CAMERA TITLE CAMERA ADJUST PIP CONFIGURATION OSD MENU MODE1 This monitor has 9 main OSD items.
SELECTING SCREEN MODE SCREEN MODE is used to select how the camera image is displayed on the screen. There are 5 options available. Use the QUAD button on the remote control to change the SCREEN MODE. ITEMS DESCRIPTIONS MODE 1 Full display of the camera chosen to display on the screen. CA1 The screen is switched to the camera which contains motion when the camera MOTION is enabled. The screen will be PBP (cameras are displayed side by side) if motion occurs within the field of both cameras.
MOTION SETUP This monitor has a motion detection function to support automatic switching from one of the cameras to the other camera with motion. Motion detection is available on both camera inputs. The Motion Sensitivity and other options for motion detection can be adjusted in this setup menu. MOTION ENABLE and SENSITIVITY options can be adjusted individually on each camera.
Use the following steps to adjust MOTION SET options. ACTION STEP 1 Press MENU and then move the indication bar to MOTION SET using 2 Press 3 Move the indication bar to CAMERA using or and then select the camera (CA1 or CA2) for adjustment of MOTION SET using or . 4 Move the indication bar to the item (MOTION ENABLE, SENSITIVITY, CAPTURE TIME or DWELL TIME) to be adjusted using or .
DISPLAY The display option on the time and date setup screen allows you to select whether to display the time and date on the screen. The default option is ON. Use the following steps to adjust the DATE/TIME option. ACTION STEP 1 Press MENU and then move the indication bar to DATE/TIME using 2 Press 3 Move the indication bar to DATE FORMAT and select the format you want using or . 4 Move the indication bar to the item (DATE or TIME) to be adjusted using or .
Use the following steps to adjust the picture quality. ACTION STEP 1 Press MENU and then move the indication bar to PICTURE using 2 Press 3 Move the indication bar to the item to be adjusted using 4 Adjust the option selected using 5 Press MENU to go to the previous OSD window or exit from the OSD. or or . to display sub-menu of PICTURE. or or . . CAMERA TITLE The CAMERA TITLE setup screen allows you to modify the name of each camera.
CAMERA ADJUSTMENT The picture quality of each camera can be adjusted by using the CAMERA ADJUST setup menu. This setup menu is composed of 7 options. CAMERA ADJUST CAMERA CA1 CONTRAST 25 BRIGHTNESS 25 COLOR 25 TINT * 25 SHARPNESS 01 SEQUENCE 03 SEC *) Tint is only activated in NTSC system. SEQUENCE This option is used to set the dwell time of the selected camera when the monitor is operated in the SEQUENCE mode. The picture sequences in the order of CA1, CA2, CA1, CA2..
PIP SIZE The PIP window size can be adjusted by using the PIP SIZE menu option. Larger PIP window sizes can be obtained by increasing the PIP SIZE value. PIP H&V POS The PIP window can be displayed in any position on the screen by adjusting these options. The PIP position is dependent on the PIP size, so care must be exercised not to display PIP window beyond the border of the screen. PIP CAMERA This option is used to select which camera is designated as the PIP window.
PHOTO INPUT This monitor can be turned off and goes to power saving mode if there is low ambient light by setting PHOTO INPUT to "ON". Use the following steps to set the PHOTO INPUT option. ACTION STEP 1 Press MENU and then move the horizontal bar to CONFIGURATION using or . 2 Press 3 Locate horizontal bar at PHOTO INPUT and then select ON of OFF using or . - ON : The monitor turns off when ambient light is low. - OFF : The monitor doesn't go to low power mode.
ADJUSTING OSD WINDOW OVERVIEW Use the OSD Menu to adjust the OSD window. The OSD Position and other options can be adjusted in this setup menu. OSD MENU LANGUAGE ENGLISH BLENDING ON TIME 40 SEC LANGUAGE Selects OSD language displayed. Use the following steps to change OSD language. ACTION STEP 1 Press MENU and then move the horizontal bar to OSD MENU using 2 Press 3 Locate the horizontal bar at LANGUAGE and then choose the desired language using or .
CHAPTER 5. TROUBLESHOOTING 1. Screen is black and power indicator is off. · Ensure that the power cord is firmly connected and the LCD monitor is on. · Check PHOTO INPUT adjustment. 2. No Picture. · Check the signal connections. 3. The image is too light or too dark. · Adjust the Brightness and Contrast. 4. Picture is impropely tinted. · Check color adjustment. 5. Motion not detected or detected too often. · Adjust sensitivity of motion detection. 6. Remote control malfunctions.
CHAPTER 6.
MODEL ITEMS Input LCD Composite Video (Built-In Camera) Composite Video (External Camera & Video Output) Built-In Camera Audio Display Source LCD Panel Active Display Area Pixel Format Pixel Pitch Color Depths Contrast Ratio Brightness Viewing Angles (L/R/U/D) Light Source / Lifetime Response Time Video Mode Camera Video Input Level Video Mode Camera Video Input Level Camera Video Input Connector Video Output Level Video Output Connector Monitor Output Level Monitor Output Connector CCD Image Sensor R
HCS775 Mount Light Duty Ceiling LCD Mount Bracket 15", 17", 19", 20.1" LCD Monitors FEATURES - Adjustable swivel head (Pan 180o, Tilt +/-15") 75mm or 100mm VESA compatible Die cast and aluminum construction Cable feed-through to conceal wiring 1,1/4" NPT standard pipe Maximum load 20 lbs (9.0kg) USE The bracket is designed for industry standard LCD monitors. The mount is intended for use in ceiling mount applications.
Rotate monitor and mount assembly to the desired location and tighten the two remaining ball socket screws firmly. Tighten the pole set screws ( ) with the supplied wrench. o 0 12 6.5 112 (1) Key Hole Lock Screw Pivot Screw (Ceiling mount configuration) (2) Unit: mm 3.94(100) 2.95(75) 4.72(120) 19.49(495) 18.50(470) 11.81(300) 1.97 (50) 129 o 15 2.95(75) 3.94(100) 5.
HCS775-E Mount Light Duty Ceiling LCD Mount Bracket 15", 17", 19", 20.1" LCD Monitors FEATURES - - Adjustable extension length (26.4" to 36.6") (670mm to 930mm) Three fixed extension lengths 26.4" (670mm), 31.5" (800mm) or 36.6" (930mm) Interior pole may be used as a 19.
Rotate monitor and mount assembly to the desired location and tighten the two remaining ball socket screws firmly. Tighten the pole set screws ( ) with the supplied wrench. o 0 12 6.5 112 (1) Key Hole Pivot Screw Lock Screw (Ceiling mount configuration) (2) 26.4 (670) 3.94(100) 2.95(75) 4.72(120) 2.95(75) 3.94(100) 5.20(132) -1 5 36.
HCS37G Mount Wall Mount Bracket for LCD monitor PRODUCT FEATURES - Light duty wall mount Conform to the VESA 75mm or 100mm standard Adjustable swivel head Durable steel construction and hardened zinc metal frame Maximum load 29 lb (13kg) The HMS37G is light duty wall mount designed for use With LCD monitor. This mount is for use in wall mounting applications and is capable of supporting loads up to 29 lb (13 kg).
MEMO 29
MEMO 30
20.1 INCH TFT-LCD MONITOR 20.
