User Guide
Table Of Contents
- Safety Precautions
- Safety Precautions - Ceiling Mounting
- Introduction
- Initial Setup
- Making Connections
- Using the Projector
- Operating the Projector
- Appendix
- Regulatory and Service Information
79
Firmware Update by USB
1. Download the latest version from the ViewSonic website and copy the le to a
USB device.
2. Plug the USB into the projector, then go to: Home > Seng > Firmware Upgrade
> Soware Update By USB.
3. Select Enter by pressing OK on the remote control.
4. The system will detect the Firmware version and display the above dialog
message.
5. Aer selecng Yes, a progress bar will appear as the update process begins.
6. Aer reaching 100%, the projector will restart and the screen will turn to black
for a few minutes. The whole updang process will take about 10 minutes.
7. Aer updang the Firmware, it will take a few minutes to restart the projector.
NOTE: Only the USB 2 (3.0) port can support Firmware updang.
(USB format: FAT32)