User Guide
Table Of Contents
- Safety Precautions
- Safety Precautions - Ceiling Mounting
- Introduction
- Initial Setup
- Making Connections
- Using the Projector
- Operating the Projector
- Appendix
- Regulatory and Service Information
35
Wired LAN Connecon
You can easily connect to wired Internet networks and customize the connecon as
well.
1. Plug the RJ45 cable into the LAN port of the projector, then ensure the other end
is plugged into your wired Internet source.
2. Go to: Home > Sengs > Network Sengs > Wired LAN
3. You can Congure the IP automacally or manually. Choosing Manual will allow
access to IP Address, Subnet Mask, Default Gateway, and DNS Server.
NOTE: It is recommended to let the system congure the network sengs
automacally by choosing Automac for Congure IP.