User Guide
Table Of Contents
- Safety Precautions
- Safety Precautions - Ceiling Mounting
- Introduction
- Initial Setup
- Making Connections
- Using the Projector
- Operating the Projector
- Appendix
- Regulatory and Service Information
33
Custom SSID
1. Ensure the Wi-Fi dongle is plugged into the projector’s Wi-Fi dongle socket.
2. Go to: Home > Sengs > Network Sengs > Wi-Fi
3. Press Le or Right on the remote control to select On.
4. From the available Wi-Fi networks list select Others and press OK on the remote
control.
5. Enter the SSID and select the security level.