User`s manual

Release Notes Kaleido-Alto/Quad/Quad-Dual Version 3.31
Updated: 3 October 2008 Part Number: M785-0203-115 7
IP address reverts to DHCP after upgrading
Issue: After upgrading the Kaleido-Alto/Quad/Quad-Dual, the “Registry” will be reset and the IP address of the
Kaleido-Alto/Quad/Quad-Dual will be reset to an address from the DHCP server. This occurs only if upgrading
from a version prior to 3.0.
Workaround: Access the Network Configuration window on the Kaleido-Alto/Quad/Quad-Dual, and reset the
address to your own fixed IP address after the upgrade is completed.
Countdown timer resizing
Issue: In KEdit the user can insert a countdown timer in a layout without any size restriction. The countdown timer
can then be resized smaller than the minimum size displayable on the Kaleido-Alto. In this case, the countdown
timer will be displayed at its minimum size by the Kaleido-Alto software.
Workaround: Modify the layout by making the countdown timer larger and repositioning it.
SECAM video signal is not recognized
Issue: The Kaleido-Alto/Quad/Quad-Dual system is not able to monitor black, freeze, or luma alarms on a
SECAM video signal.
Workaround: To be able to monitor black, freeze, and luma, use the Y-only (black & white) portion of the SECAM
signal as an input to the Kaleido-Alto/Quad/Quad-Dual.
Dot crawl with high chrominance and luminance values
Issue: When maximum values of luminance and chrominance are set, dot crawl may be visible on a video
component.
Workaround: Change luminance and chrominance levels to lower values.
Problem with layout download and SNMP traps transmission
Issue: IP negotiation problems can occur when a Kaleido-Alto/Quad/Quad-Dual is set to handle data at
100 Mbps. This IP configuration may affect layout downloads or SNMP trap transmission.
Workaround: Hard reboot the unit to fix the problem, or leave the setting at 10 Mbps for optimal operation.
During the boot-up sequence, only master Kaleido will display video images
Issue: During the boot-up of Kaleido frames in a cascade configuration, only the master frame will display video
images.