User`s manual

Release Notes Kaleido-Alto/Quad/Quad-Dual Version 3.31
Updated: 3 October 2008 Part Number: M785-0203-115 5
Brand Model Resolution
Aquos LC32D62U 1920x1080, 60 Hz
LMD-232W 1280x768, 60 Hz
Bravia KDL-26M3000 1360x768, 60 Hz
Bravia 1920x1080, 50 Hz
Bravia 1920x1080, 60 Hz
Sony
LMD-2450W 1920x1200, 60 Hz
VX1945 1440x900, 60 Hz
VX1945 1440x900, 50 Hz
VG2230 1680x1050, 50 Hz
VG2230 1680x1050, 60 Hz
ViewSonic
VX2025wm 1680x1050, 60 Hz
Supported Embedded Time Code Formats and Alarms
Embedded Time Code Format
Kaleido Model
Hardware
revision
1
VITC DVITC ATC
Black/Freeze/Luma
Alarms
100 - 200 Not Supported Not Supported Not Supported Not Supported
Kaleido-Alto-A
200* Not Supported Not Supported Not Supported Not Supported
100 - 200 Not Supported Not Supported Not Supported Not Supported
Kaleido-Alto-D
200* Not Supported Not Supported Not Supported Not Supported
100 - 200 Not Supported Not Supported Not Supported Not Supported
Kaleido-Alto-AD
200* Not Supported Not Supported Not Supported Not Supported
Kaleido-Alto-A2 300 or later
Supported
Not Supported Not Supported
Supported
Kaleido-Alto-AD2 300 or later
Supported Supported
Not Supported
Supported
Kaleido-Alto-HD 300 or later
Supported Supported Supported Supported
Kaleido-Quad-AD 300 or later
Supported Supported
Not Supported
Supported
Kaleido-Quad-HD 300 or later
Supported Supported Supported Supported
Kaleido-Quad-Dual All
Supported Supported Supported Supported
1
200 = v. 200 base version; 200* = v. 200 enhanced version
Known Issues and Limitations
Clock time zone
Issue: When using the unit’s internal clock as the time reference for clock components, occasionally the time
zone will not be applied properly.
Workaround: Right-click the clock component, and then click Clock Settings on the shortcut menu. Select the
appropriate time zone again, and then click OK. Save the layout.
Daylight saving time
Issue: The internal clock does not support daylight saving mode.
Workaround: During daylight saving time, specify the appropriate time offset for all the clock components in your
layouts that are configured to use the unit’s internal clock as the time reference. Remember to save each