User`s manual

Release Notes Kaleido-Alto/Quad/Quad-Dual Version 3.31
Updated: 3 October 2008 Part Number: M785-0203-115 3
• (B15454) Alarms, channels, actions or audio scales exported with layouts from KEdit to a Kaleido-
Alto/Quad may not synchronize properly.
• (B13613 and B15526) Loss of a dynamic UMD from TSL may occur when using channel assignments or
changing view to full screen.
Version 3.20
New Features
• Support for the new Kaleido-Dual Quad series, which includes:
o Kaleido-Quad-Dual-HD (HD/SD-SDI and Composite Dual Quad Split Processor w/redundant PSU)
o Kaleido-Quad-S-HD-R (HD/SD-SDI and Composite Quad Split Processor w/redundant PSU)
• Shortcut to return to default resolution (1280 x 1024 @ 60 Hz):
Press Ctrl+Alt+R on a USB keyboard connected to the unit.
Fixes
• (B14458) Changing output resolution sometimes doesn’t work (system returns to the default resolution of
1280 x 1024 @ 60 Hz).
• (B14459) Some output resolution timings are inexact.
• (B14545) Not able to select “PC in” audio input for audio monitoring output.
• (B14804) TSL service, Andromeda service and any Remote Control Commands cannot trigger tallies.
• (B14805) Potential problem (crashes) when using Gateway alarms and texts with the same addresses
within a layout.
• (14832) White dots in the Analog clock don’t display properly.
Version 3.10
New Features
• Kaleido-Alto/Quad/Quad-Duals can now be configured to operate in cascade mode for up to 30 inputs on
one display.
• (B12633) A Kaleido-Alto/Quad/Quad-Dual can now decode and display the VITC from video sources.
Fixes
• (B12635) A line of noise appears at the bottom of the screen when setting the underscan mode
This problem has been fixed in version 3.10 via a firmware update.
Frequently Asked Questions (FAQ)
Q. Does the Kaleido-Alto/Quad/Quad-Dual come with a fixed IP address?
A. By default, the Kaleido-Alto/Quad/Quad-Dual is configured using DHCP. However, a fixed address can be
entered in the Network Configuration panel (see the User’s Manual for more information).
Q. Is it possible to upgrade the Kaleido-Alto-A, D and AD with version 2.1 or is new hardware needed?
A. Yes, an upgrade is possible. Visit http://www.miranda.com/portal/downloads.php to get the latest version
available. The upgrade package consists of firmware and software files that can be transferred from a client PC
via TCP/IP to a Kaleido-Alto, Layout and configuration files are not affected by the upgrade.