ViewBoard® Cast Button VS18188 & VS18189 User Guide Brugervejledning Handleiding Käyttöopas Manuel utilisateur Bedienungsanleitung Manuale utente Brukerveiledning Podręcznik użytkownika Руководство пользователя Guía del usuario Användarguide Kullanım Kılavuzu
Device Requirements • Windows 7/8/10 • MacOS 10.10 or later • ViewSonic IFP/CDE series device(s) with vCastReceiver installed and activated. • VS18188: Device supports fully featured USB Type-C function that covers USB & DP. • VS18189: Device supports HDMI & USB Type-A. Pairing Windows PC and MacBook Pairing VS18188 VS18189 Figure 1 Figure 2 1. Plug-in the ViewBoard® Cast Button into your Windows PC or MacBook to pair. • For VS18188: Please plug-in to the USB Type C port (Figure 1).
. For PC, with the application installed, ViewBoard® Cast will launch automatically after the ViewBoard® Cast Button is plugged into the PC.
. The pairing dialogue box will pop up on your PC. Please enter the Network Name, Password, and the vCastReceiver IP address shown on the IFP/CDE device(s) home screen. 5. Click OK to complete the pairing of the ViewBoard® Cast Button and the IFP/CDE device(s) (Figure 3). Figure 3 6. Remove the ViewBoard® Cast Button and then plug it in again to start sharing (Figure 4).
7. If the ViewBoard® Cast Button has been paired, and you would like to pair it with another IFP/CDE device, please click the “Pairing-Switch Button” at the bottom right corner (Figure 5) and re-enter the network information to re-pair the ViewBoard® Cast Button (Figure 6). After the ViewBoard® Cast Button is re-paired, please remove it and plug it in again to start sharing.
For VS18189: 1. Plug the USB Type A cable into the IFP/CDE device’s USB port for pairing. 2. A “Pairing” dialogue box will appear. 3. Enter the Network Name and Password, then select Save to pair (Figure 8).
Screen Sharing Figure 1 Figure 2 Figure 3 Figure 4 NOTE: Ensure the ViewBoard® Cast Button is plugged into your Windows PC/MacBook. 1. When the ViewBoard® Cast Button is connecting to your device, the LED indicator will be flashing blue. Your device is ready for screen sharing when the LED indicator changes to static blue (Figure 1). 2. Tap the button of the ViewBoard® Cast Button to share your device’s screen to another display.
Regulatory and Service Information FCC Compliance Statement NOTE: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
Déclaration d’exposition aux radiofréquences pour IC L’appareil a été évalué pour répondre aux exigences générales en matière d’exposition aux RF. L’appareil peut être utilisé dans des conditions d’exposition mobiles. La distance de séparation minimale est de 20cm. Operation of this device is restricted to indoor use only. (5G Wi-Fi). Le fonctionnement de cet appareil est limité à une utilisation en intérieur uniquement. (5G Wi-Fi).
Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Country/ Region Website Website Asia Pacific & Africa Australia www.viewsonic. com/au/ Bangladesh www.viewsonic. com/bd/ 中国 (China) www.viewsonic. com.cn 香港 (繁體 中文) www.viewsonic. com/hk/ Hong Kong (English) www.viewsonic. com/hk-en/ India www.viewsonic. com/in/ Indonesia www.viewsonic. com/id/ Israel www.viewsonic.
Country/ Region Website Türkiye www.viewsonic. com/tr/ United Kingdom www.viewsonic. com/uk/ Country/ Region Україна Website www.viewsonic.
