User's Guide

Device Requirements
• Windows 7/8/10
• MacOS 10.10 or later
• ViewSonic IFP/CDE series device(s) with vCastReceiver
installed and activated.
• VS18188: Device supports fully featured USB
Type-C function that covers USB & DP.
• VS18189: Device supports HDMI & USB Type-A.
Pairing
Windows PC and MacBook Pairing
VS18188
Figure 1
VS18189
Figure 2
1. Plug-in the ViewBoard® Cast Button into your
Windows PC or MacBook to pair.
• For VS18188: Please plug-in to the USB Type C
port (Figure 1).
• For VS18189: Please plug-in to both the HDMI
out and USB Type A ports (Figure 2).
2. If it is the first time to pair the ViewBoard® Cast
Button with your Windows PC, please double
click “ViewBoard Cast.exe” in: PC > CD Drive >
ViewBoard Cast.
NOTE: If running on a MacBook, please enter the
user password to access the application
installation permission.
3. For PC, with the application installed, ViewBoard®
Cast will launch automatically after the ViewBoard®
Cast Button is plugged into the PC.