VFA724W / VFD824 Digital Photo Frame - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Käyttöopas - Руководство пользователя - Kullanιcι kιlavuzu - Οδηγός χρηστών Model No.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright© ViewSonic Corporation, 2010. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Important Safety Instructions Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture Warning: T o prevent the risk, do not remove the cover, there are no spare parts inside, refer all product services to professional personnel. • Digital Photo frame is for indoor use only.
Identify the Parts Button Action Move the selection up or left, display the previous photo, or select the previous file ENTER Select the highlighted option, start a Slide Show , Pause or Play Move the selection down or right, display the next photo or select the next file. EXIT Exit the current display, or go back a screen. Menu Into the OSD Menu Mode Power(On/Off) Setup Up the Digital Photo Frame The Digital Photo Frame is easy to set up. Just follow these steps: 1.
Setting Up the Slideshow You can control all Digital Photo Frame functions with the buttons on the top of the Digital Photo Frame or with the remote control. To display the setup screen, simply hold down the Exit button for a second or press the Setup button on the remote control. Card Selection Screen Use the Card Selection menu to choose between memory card and USB Drive. 1.
Setting Viewing Options You can control all of the viewing options in the Setup menu using the buttons on the top of the frame. 1. To show the Setup menu, Press the Exit button until Select Mode or Select Card screen shows, then press Setup button. 2. With the Setup menu open, use the Up and Down arrows to choose a display option. 3. Press Enter to select the option. A second menu opens, listing the available settings. A white square shows the current setting. 4.
Technical Specification Product VFA724W (17.8cm/7.0” LCD Screen Digital Photo Frame) VFD824 (20.3cm/8.0” LCD Screen Digital Photo Frame) Resolution VFA724W 480 x 234 pixels VFD824 800 x 600 pixels Memory Card Format Secure Digital™, MultiMedia Card™, Memory Stick Pro Duo™, Memory Stick Duo™ File Format Standard JPEG Feature Slideshow mode Multiple transitional Style for Slideshow Variable Speed for Slide Show Four Position Adjustable Stand for optimum view angle USB Port USB 2.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Region Web Site T=Telephone F=Fax Australia/New Zealand www.viewsonic.com.au Canada www.viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm Hong Kong www.hk.viewsonic.com T= 852 3102 2900 service@hk.viewsonic.com India www.in.viewsonic.com T= 1800 11 9999 service@in.viewsonic.
Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
