ViewSonic ® VOT132 PC Mini - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Pyководство пользователя - 使用手冊(繁中) - 使用手冊(簡中) Model No.
Preface Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This wireless module device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice This wireless module device complies with Canadian RSS-210.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation. Award® is a registered trademark of Phoenix Technologies Ltd.
Table of Contents Chapter 1 Introducing the VOT132 Top View............................................................................................................ 2 Front Side View................................................................................................. 2 Back Side View................................................................................................. 3 Bottom View.....................................................................................................
Chapter 1 Introducing the VOT132 The VOT132 PC Mini is a compact and easy to use desktop. It features all the standard PC capabilities but with a slim body design which enables you to do spreadsheets, create documents, watch online content and browse the internet in a smarter and greener way.
Introduction The VOT132 PC Mini features all the desktop capabilities but with a slim body design which enables you to browse the internet in a relaxed and comfortable way. 1-1 Top View 190mm 135mm 1-2 Front Side View 25mm 1 2 3 4 LLS_LED1 5 LLS_LED5 6 7 8 No. Name Description 1 Headphone Port Connects to headphones 2 Microphone In and S/PDIF In Port Connects to a microphone or playback devices with optical connectors (3.
1-3 Back Side View 1 No. 2 Name 3 4 5 6 7 Description 1 RF(Radio Frequency) Port For connecting the antenna 2 USB 2.0 Ports Connects to USB devices 3 Display Output Port (DVI) Connects to display device 4 HDMI Port Connects to HDMI audio and video 5 Network Port Standard RJ-45 network port 6 Line Out and S/PDIF Out Port Connects to powered analog speakers or recording devices with optical connectors (3.
CA UT IO N 1-5 LED Indicator Introduction ! Indication Power_ LED HDD_ LED LLS_ LED1 LLS_ LED2 LLS_ LED3 LLS_ LED4 LLS_ LED5 S0(Working Mode) Green - Off Off Off Off Off S1(Power-Saving Mode) Green Off Off Off Off Off Off S3(Standby Mode) Red Off Off Off Off Off Off S4(Hibernation Mode) &S5(System Power Off Mode) Red Off Off Off Off Off Off CPU Initialization Error - - Blue, Blink - - - - DRAM Error - - - Blue, Blink - - - BIOS Boot Block Fail - -
Chapter 2 Connecting Peripherals In this chapter, the placement and the connection of some necessary peripherals will be introduced.
2-1 Placement of the VOT132 PC Mini 1. On the Desk 1. Seat the unit in the desktop stand as shown to the right. 2. You can also place the VOT132 directly on the desktop. 2. Mounted to the back of a display. CA UT IO N This is the best space-saving way. 1. Use four screws(M4*10, round head) to fasten the VESA mounting bracket to the back of the display. ! Your display must have a 75mm x 75mm or 100mm x 100mm VESA mounting pattern.
2. Fit the VOT132 into the bracket with the power button located at the top for easy access. 2 1 CA UT IO N 3. After that, you can connect the antenna to the PC Mini. ! To remove the VOT132 from the mounting bracket you must first remove the antenna.
2-2 Connection of VOT132 1. Connecting the Antenna Connect the antenna to the RF port of the VOT132. You can then position the antenna and rotate it in different positions. 1 2 2. Connecting the VOT132 to a monitor Connect to the monitor thru the DVI connector. 3. Connecting USB Devices Connect USB devices using the USB ports on the front or back, for example, mouse and keyboard.
4. Conecting the network cable Hub or Switch Connect the LAN cable into the RJ-45 port with the other end connected to a hub or switch. 5. Connecting the power cord Connect the power adapter to the power input port of the VOT132, and push the power button to start it up. 1 Outlet 3 2 CA UT IO N ! Do not cover the power adapter while in normal use to allow normal heat dissipation.
Chapter 3 BIOS Setup This chapter provides a description of the BIOS setup utility. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact ViewSonic®. The BIOS setup utility provides a built-in Setup program, which allows the user to modify the basic system configuration and hardware parameters.
Main Menu The BIOS Setup is accessed by pressing the button after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “←” and “→” cursor keys to navigate between menu screens.
Advanced Menu Main Advanced Chipset BIOS SETUP UTILITY Boot Security Exit Advanced Settings Suspend mode [S3 (STR)] Legacy USB Support [Enabled] Restore on AC Power Loss [Last State] ► Wakeup Configuration ► Onboard Device Configuration Select the ACPI state used for system Suspend ← Select Screen ↑↓ Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Wakeup Configuration BIOS SETUP UTILITY Advanced Wakeup Configuration Resume on PCIE [Disabled] Resume By RTC Alarm [Disabled] Resume By USB KB/MS [Disabled] Disable/ Enable PCIE PME to generate a wake event. ← Select Screen ↑↓ Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc. ► Resume On PCIE [Disabled] This item is used to enable/disable PCIE PME to generate a wake event.
Onboard Device Configuration BIOS SETUP UTILITY Advanced Onboard Device Configuration Onboard LAN Controller Onboard LAN ROM Audio Controller Onboard LAN Controller [Enabled] [Disabled] [Enabled] ← Select Screen ↑↓ Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc. ► Onboard LAN Controller [Enabled] This item is used to enable or disable the Onboard LAN Controller.
Boot Menu Main Advanced Chipset BIOS SETUP UTILITY Boot Security Exit Boot Boot Settings ► Boot Settings Configuration Configure Settings during System Boot. ► Boot Device Priority ← Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc. ► Boot Settings Configuration/Boot Device Priority Press to go to relative submenu.
Boot Device Priority BIOS SETUP UTILITY Boot Boot Device Priority Specifies the boot sequence from the availabe devices. 1st Boot Device [SATA: 3M-FUJITSU MH] 2nd Boot Device [USB: Generic STORAG] A device enclosed in parenthesis has been disabled in the corresponding type menu. ← Select Screen ↑↓ Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Exit Menu Main Advanced Chipset BIOS SETUP UTILITY Boot Security Exit Exit Options Save Changes and Exit Discard Chages and Exit Discard Changes Load Optimal Defaults Exit system setup after saving the changes. F10 key can be used for this operation. ← Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
Chapter 4 Installing Windows 7 onto the VOT132 This chapter introduces the Windows 7 installation: ■ Installing Windows 7 ■ Installing Windows 7 Drivers Make sure you have these ready: 1. VDD100 (optional optical disk drive). You can also use an external USB DVD ROM drive. 2. VOT132 driver CD. (In this package) 3. Windows 7 Install CD. Before we continue: ■ ■ Before starting make sure your VOT132 is powered off Connect the VDD100 or USB DVD-ROM drive to a USB port and power it on.
4-1 Installing Windows 7 1. Push power button to turn on your computer, then press key to enter BIOS Setup. 2. Put the Windows 7 Install CD into the VDD100 or USB DVD-ROM drive. 3. Select and go to the “Boot” menu, enter “Boot Device Priority”, set the “1st Boot Device” to “USB: Optical DVD RW”, press key to save change and exit BIOS. BIOS SETUP UTILITY Boot Boot Device Priority Specifies the boot sequence from the availabe devices.
5. After the computer reboots it will start loading the files for installing Windows 7. Click “Next” to continue and click “Install now” button to start the setup. 6. When the license terms appear choose accept and click “Next” to continue. 7. It will then ask you to select the installation type. Click “Custom (advanced)” to install a new copy of Windows. 8. The setup will the display the hard disk partitions (160GB, in this example) of your system.
9. In the hard disk size screen, you can click the “new” button to create partitions as you need. In this example we are creating a 70GB partition to install Windows. Make your modifications and click “Apply”. To ensure that all Windows features work correctly, Windows might create additional partitions for system files. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click “Next” to continue.
10. The setup program will then start to install Windows 7 on your hard disk. During the installation, your computer will restart several times. 11. When the installation is complete, setup will prepare your computer for it’s first use. You can then follow the steps to select system settings, create an account, set a password...etc, until the whole process is complete.
4-2 Installing drivers in Windows 7 1. When the Windows 7 is completely installed, you have to install the necessary drivers before using the VOT132. Take out the Windows 7 Install CD from the USB DVD-ROM drive, and put the VOT132 driver CD inside. 2. Afer a few seconds, the main menu will be displayed on the screen. 3. You must click "Intel Chipset Driver" to install it first.
Appendix-Frequently Asked Questions Q1: Is the HDD designed to be shock proof? A1: Yes it is. Q2: Can I add additional RAM? A2: No you cannot. Q3: Can the VGA share memory be adjusted in BIOS? A3: No it cannot. Q4: How do I change the Boot Device from HDD to another bootable device? A4: When seeing POST message, press “F9” to enter boot menu then to select the bootable device you plugged in.
Chapter 5 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website Australia/New Zealand www.viewsonic.com.au Canada www.viewsonic.com Europe Hong Kong India www.viewsoniceurope.com www.hk.viewsonic.com www.in.viewsonic.com Ireland (Eire) www.viewsoniceurope.com/uk/ T = Telephone Email F = FAX AUS= 1800 880 818 service@au.viewsonic.
Limited Warranty VIEWSONIC® PC MINI What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
