ViewSonic ® DPG807 Digital Photo Frame - User Guide - Guide de l’utilisateur - Guía del usuario Model No.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Do not use the equipment near water. Wipe the machine with a soft and dry cloth. Do not block any vent holes. Please install the product in accordance with the manufacturer’s instructions. Do not use the product on your legs for a long time because it gets hot and you may be burned.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.
Copyright Information Copyright© ViewSonic® Corporation, 2008. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
TABLE OF CONTENTS ViewSonic iv ENGLISH Introduction........................................................................................................................................................... 1 Important Safety Precautions.............................................................................................................................. 2 Features......................................................................................................................................
Introduction Congratulations on your purchase of this Digital Photo Frame (DPF). Before operating this unit, please read this manual thoroughly and keep it for future reference. This manual will help you use many of the exciting features to make your Digital Photo Frame view more enjoyable. The Digital Photo Frame is compatible with SD, MMC, MS, XD and CF memory card formats, which enables you to view digital photo directly from your camera’s memory card.
Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, product damage and personal injury. • arning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer W servicing to qualified personnel. • Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture.
Cleaning • Before cleaning the product make sure it is turned off. • Never spray or pour liquid directly onto the screen or plastic casing. • To clean the LCD screen, wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen. • To clean the plastic casing, use a soft, dry cloth.
• • • • • • • • • • • • • • ENGLISH Features Seven touch buttons on the front panel of the frame Decorative appearance, good quality Displays digital pictures (JPEG) without a computer Automatic slide show with multiple transition effects and desired interval.
Location of Controls 1. 2. 3. 4. 5. 6. 7. 8. SD/MMC/MS/XD-card slot CF-card slot USB HOST for connecting the USB device directly. Earphone jack USB device port for connecting the computer DC 9V 1.5A Port Frame base [►] Touch to start playback or confirm the selection. 9. 10. 11. 12. 13. 14. ViewSonic [M] Touch to return to the main menu. Touch and hold to display the OSD menu while playing photos or movies [ ] Touch to return to the previous menu.
ENGLISH Getting Started Connecting the power cable 1. Fix the Photo Frame stand on the slot at the back of the unit so that it is stands up. 2. Use the supplied power adapter to connect the digital photo frame to an electrical outlet. 3. Slide the power switch on the back of the photo frame from OFF to ON. Note: • To turn off the power of the Digital Photo Frame completely, slide the power switch from ON to OFF.
Inserting memory cards To play the content of a memory card you just have to insert it into the respective card slot on the Digital Photo Frame. This Digital Photo Frame is compatible with the following memory cards: • • • Secure Digital Card (SD) Memory Stick (MS) Compact Flash card (CF) • • Multimedia Card (MMC) XD Card Insert the SD/MMC/MS/XD card into the 4-in-1 card slot with the metallic contacts facing towards the display.
Note: • Make sure there is no USB mass storage device connected with Digital Photo Frame before connecting to computer. • You must plug in and turn on the photo frame before connecting to the computer. • When connecting with a computer, the USB HOST driver is not available. • Do not disconnect the USB cable or remove the card when coping or transferring the files to the built-in memory or card on the photo frame. • Make sure your computer is running Windows 2000 or above, e.g.
Viewing Photos Main screen Once you switch on the digital photo frame, the main screen appears. When a memory device is inserted into the Digital Photo Frame, the corresponding icon appears on the main screen. Use the [ ] or [ ] button to select a memory device. In the main screen, you can select connected source to view pictures, change frame settings, or display the calendar. 1. Press the [M] button to access the main screen. All connected source, setup and calendar icons are displayed.
Press the [ ] or [ ] button to highlight a picture source. To display photo, music, movie or file individually, press the [►] button. ENGLISH 2. Note: • If no button is touched for 6 seconds in the main screen after inserting a memory source, the slideshow will start automatically. • If several memory devices connect to the frame simultaneously, the Digital Photo Frame will read the memory source by the priority order: USB, CF, SD/MMC/MS/XD, NAND flash (only for model with internal memory).
Viewing thumbnails The pictures on the selected memory source can be displayed on the screen as thumbnails. Up to 15 pictures are displayed at a time. 1. Select a memory source (e.g. USB, SD/MMC) in the main screen and press the [►] button. The mode menu appears. 2. Press the [ ] or [ ] to select Photo, and press the [►] button. The pictures are displayed on the screen as thumbnails. 3. To navigate through the thumbnails, press the [ ], [ ], [ ] or [ ].
[ ] or [ ]: ROTATE [ M ] :MENU ENGLISH Browsing a single picture You can select a single picture to display on the screen, without a slideshow. 1. Select a picture in the thumbnail view, and press the [►] button. The selected picture is displayed on the full screen. • To view the previous or next photo, press the [ ] or [ ] button. • To rotate a picture, press the [ ] or [ ] button. 2. To return to the thumbnail view, press the [ ] button. 3.
Using OSD menu You also can use the OSD menu to manually view the photos one by one. 1. Touch and hold [M] button during viewing the picture or slideshow. The OSD menu appears in the center of the screen and slideshow pauses. 2. Press the [ ] or [ ] button to navigate between the icons on the OSD menu. • To start or resume slide show from the current picture, highlight ► and press the [►] button. The ► icon is changed to • To skip to previous picture, highlight and press the [►] button.
ENGLISH Listening to Music If there are MP3 files on the memory device, you can play them on the Digital Photo Frame. 1. 2. 3. 4. elect a memory source (e.g. USB, SD/MMC) in the main screen and S press the [►] button. The mode menu appears. Press the [ ] or [ ] button to select Music, and press the [►] button. The music list and playback interface appears. Use the [ ] or [ ] button to select the desired track and press the [►] button to play. • To pause playback, press the [►] button.
Watching Videos You can watch the videos on the Digital Photo Frame. It supports the format of MPEG-1, MPEG-4 and M-JPEG used by most digital cameras. 1. Select a memory source (e.g. USB, SD/MMC) in the main screen and press the [►] button. The mode menu appears. 2. Press the [ ] or [ ] button to select Movie, and press the [►] button. The video list with a thumbnail video window appears. 3. Press the [ ] or [ ] button to select a video file. The corresponding video starts playback in thumbnail view. 4.
In the File mode, you can view all playable files and folders on the memory source. You also can copy files from a memory device to another memory device or delete the files. 1. elect a memory source (e.g. USB, SD/MMC) in the main S screen and press the [►] button. The mode menu appears. 2. Press the [ ] or [ ] button to select File, and press the [►] button. The file list appears. 3. Use the [ ] or [ ] button to navigate between files and folders.
Coping files 1. 2. 3. 4. 5. Highlight a file using the [ ] or [ ] button and press the [ ] button. A check mark is displayed next to the file. To check more files, repeat above step. Touch and hold [M] button. A menu with COPY and DELETE options is displayed on the right screen. Use the [ ] or [ ] button to select COPY and press the [►] button. The other available memory source is displayed.
ENGLISH Changing Frame Settings The system settings let you customize and configure your Digital Photo Frame. 1. 2. 3. 4. elect the SETUP icon in the main screen and press the [►] S button. The Setup Menu and software version appear on the screen. To select a setting option, press the [ ] or [ ] button. To change the value, press the [ ] or [ ] button and then press the [►] button to confirm. Press the [ ] button to exit.
Music Repeat Mode Movie Repeat Mode TFT Brightness TFT Contrast TFT Saturation Auto Power On Auto Power Off Key-light Timeout Time Alarm Autorun Default ViewSonic Choose the file repeat mode for music playback. Repeat one: Play the selected music repeatedly. Repeat all: Play all music files on the selected memory source repeatedly. Repeat off: Play all music files on the selected memory source once. Choose the file repeat mode for movie playback. Repeat one: Play the selected movie repeatedly.
Setting time You can set the system time to the current date and time so that the Calendar display is correct. 1. Select the SETUP icon in the main screen and press the [►] button. The Setup Menu appears on the screen. 2. Press the [ ] or [ ] button to select TIME. 3. Press the [ ] or [ ] button to highlight next or previous setting (year, month, day, hour, minutes). And press the [ ] or [ ] button to adjust the time. 4. Press the [►] button to confirm.
3. 4. ress the [ ] or [ ] button to highlight next or previous setting (hour, minutes, ring tone, schedule). And press the [ ] or [ ] P button to adjust the time, select the ring or select the schedule as below. • Off: Disables the auto power on or off function. • Everyday: The Digital Photo Frame will turn on or off at the preset time everyday. • Once: The Digital Photo Frame only turns on or off at the preset time once. Press the [►] button to confirm.
You can switch your Digital Photo Frame to Calendar mode that the current date and time is displayed on the screen with a slide show in thumbnail. 1. 2. elect the Calendar icon in the main screen and press the [►] S button. The Calendar is displayed on the screen and all photos in the all memory source start slide show in thumbnail. To exit the Calendar mode, press the [ ] button.
Frequently Asked Questions 1. • • Why cannot the Digital Photo Frame display some files from my Flash card or USB device? Some unpopular memory cards are not compatible with the device. Use a card which matches with the Digital Photo Frame. The file formats on your card or USB device might not be supported (only JPEG pictures are accessible). Provide files with the supported JPEG. 2. • • • There is a memory card inserted in the Digital Photo Frame, but the device is not able to read the card.
Why doesn’t my Digital Photo Frame go into Auto-off or Auto-on status after I set it? Make sure you set current time correctly. The Digital Photo Frame will automatically turn on or turn off its display exactly at the Auto-on or Auto-off time. If the time has already passed for the day, it will start entering Auto-on or Auto-off status at the specified time from the next day. 7.
Specification Display I/O Power adaptor USB port Supported peripheral devices Supported photo format Supported audio format Supported video format Operating temperature Dimension Weight ViewSonic Digital TFT LCD Panel size: 8 inches Screen aspect ratio: 4:3 Resolution: 800*600 pixels Touch buttons, DC in, Stereo speaker Input: 100~240V AC, 50/60Hz Output: 9V 1.5A DC USB Host 2.0 & USB device 2.
ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Telephone e-mail China www.viewsonic.com.cn 800 820 3870 service.cn@cn.viewsonic.com Hong Kong www.hk.viewsonic.com/support/ 852 3102 2900 service@hk.viewsonic.
Limited Warranty ® VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
