ViewSonic ® N3290w N4290p N4790p User Guide LCD TV ViewSonic ® Model No.
Dear ViewSonic customer, Congratulations on your purchase of a ViewSonic TV display. For maximum benefit of your TV, please read these instructions before any operations. For assistance, please contact ViewSonic service team at http://www.viewsonic.com.au/support/ or call our service team: Australia 1800 880 818. To purchase or inquire about any accessories and installation services you’re your TV, please visit http://www.viewsonic.com.au/ or call: Australia 1800 880 818.
Caution Please use the following ViewSonic TVs only with the following wall-mount kit. ViewSonic TV Model No. N3290w ViewSonic Wall-Mount kit model WMK-13 N4290p WMK-13 N4790p WMK-13 Use with other Wall-Mount kit may cause instability and possibly result in injury. To find the perfect mount for N4290p/N4790p, please browse http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818. Copyright Information Copyright © ViewSonic® Corporation, 2008. All rights reserved.
Compliance Information Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
Contents Product Registration.............................................................................................. i Customer Support................................................................................................. 1 Caution................................................................................................................... ii Copyright Information........................................................................................... ii Compliance Information .....
WARNING Do not expose this TV to rain or moisture. It may increase the risk to fire or electronic shock. Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.
Important Safety Instructions 1) Read these instructions completely before using the equipment. 2) Keep these instructions in a safe place. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean with a soft, dry cloth. 7) Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
When not in use If you will not be using the TV set for long periods of time, the TV set should be disconnected from the AC power outlet to prevent power line surges. The TV set is not disconnected from the AC power source when the TV set is switched off. To disconnect the TV set completely unplug from the AC power outlet. Overloading This TV set is designed to operate on a 120 - 240 V AC supply only.
MAGNETIC INFLUENCE This TV contains a strong magnet in the speaker unit that generates a magnetic field. Keep any items susceptible to magnetic fields away from the speaker. SOUND If you hear snapping or popping sound comes from the TV continuously or frequently while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TVs to make occasional snapping or popping sounds, particularly when being turned on or off.
Objects and ventilation holes Never push any objects into the slots on the TV cabinet as they may touch dangerous voltage points or short out parts that could result in a fire or an electric shock. Do not place any objects on the TV. MOISTURE Moisture and flammable objects ◊ Keep the product away from moisture. Do not expose this appliance to rain or moisture. Do not place objects filled with liquids, such as vases, on the TV.
VOLUME ADJUSTMENT Broken pieces ◊ Adjust the volume to avoid disturbing your neighbors. Sound carries easily at night. Therefore, we suggest you close the windows or use headphones. ◊ When using headphones, adjust the volume to appropriate levels, or hearing damage may result. Do not throw anything at the TV. Doing so may break the screen glass and cause serious injury. If the surface of the TV cracks, unplug the AC power cord before touching the TV. Otherwise electric shock may result.
Getting Started List of Features 1. 2. 3. 4. 5. 6. Enjoy HDTV with 1920x1080 native image resolution. (32” -1366x768) ClearPictureTM technology with 3D de-interlacing for precise video. Built-in digital tuners (HDTV, PAL, DVB-T cable) Displays multiple TV formats including 576i, 576p, 720p, 1080i, 1080p Easy setup with multiple video inputs including HDMI(x4). Convenient swivel base Package Contents Please make sure the following items are included with your LCD TV.
Getting Started Installing the LCD TV Installing the Stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Connect the stand with the hinge at the back of TV with screws. 3. Attach the base to the stand with screws. Disconnecting the Stand 1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove the base. It is attached to the stand with screws. 3. Remove the screws holding the stand to the hinge. 4. Remove the stand. Contact ViewSonic service team at: http://www.
Getting Started Mounting ViewSonic LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the wall, please consider the following guidelines: z Read the Important Safety Instructions, at the start of this manual. z Do not install in a moist or wet environment. This equipment is intended for indoor use.
Getting Started Wall Mount Kit Specifications (VESA) When attaching to other building materials, please contact your nearest dealer. C D N4290p N3290w Product Family LCD TV z z z N4790p inch VESA Spec.
Getting Started Front View of the Product 1 2 Item Remote Control Receiver Power LED Indicator 3 Power ON/OFF button 4 5 6 SOURCE MENU PR ▼ 7 PR ▲ 8 VOL - 9 VOL + Description Receives IR signals from the remote control Lights up in blue when the TV is turned on. Lights up in red when the TV is in standby mode. Turn the power on from standby mode or turn the power off return to the standby mode. Select input source. Turn OSD menu ON/OFF.
Getting Started Rear View of the Product Item 1 Power (AC input) 2 HDMI Input HDMI Audio (left/ right) 3 Composite Video input 4 Composite/ Audio input (left/ right) 5 YPbPr signal input 6 YPbPr Audio input (left/ right) 7 Digital audio out 8 TV Input Jack 9 Composite Video output 10 Composite/ Audio output (left/ right) 11 PC Audio input 12 VGA signal input Description Plug-in the supplied AC Power cord and connect to the AC input power source.
Getting Started Side View of the Product Item A HDMI Input B S-Video input C E Composite Video input Composite/ S-Video Audio input (left/ right) Headphone Jack F USB D Description Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. Connect the S-Video cable from the compatible device to this connector on the rear panel of the LCD TV display Connect this jack to the composite video output connectors on your A/V equipment.
Component (YPbPr) connection YPbPr provides better picture quality than the S-Video or the AV connection. ＊For YPbPr connection, connect the component video (YPbPr) and audio jacks to the corresponding output jacks of your A/V device.
Getting Started Connecting the LCD TV Cable System or VHF/UHF Antenna System Enjoy the high-definition and standard-definition digital programming along with standard- definition analog programming. ☼ • This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna. • We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable (not supplied) to ensure the best picture quality.
Getting Started ☼ If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI 1/2/3 jack [10] and connect the audio jack to the AUDIO In jacks [11], ViewSonic 16 N3290w/N4290p/ N4790p
Getting Started Personal Computer Use the LCD TV as the monitor of your computer. The picture below shows the connection for PC. The LCD TV can also be connected to PC. ☼ z z Connect the PC IN jack to the PC using a 15-pin cable and audio cable. If the PC is connected to TV and no signal has been input from PC for more than 30 seconds, the TV will enter standby mode automatically. PC Timing Reference Chart Mode *.* *.
Getting Started Other Equipment ☼ • Please refer to the Quick Start Guide (supplied) when connecting the other equipment to your LCD TV.
Using the TV Features Remote Control and TV Controls Inserting Remote Control Batteries ENGLISH 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. z z z z z z CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of fire or lead to personal injury.
Using the TV Features Remote Control and TV Controls 1 Button Power 2 Picture 3 Aspect 4 0~9, - number buttons 5 EPG 6 Menu 7 ▲▼◀ ▶ menus. ▲▼◀ buttons ViewSonic Description Press this button to turn the power on from standby mode. Press it again to return to the standby mode. To Select a predefined picture setting. Standard/ Vivid/ Personal/ Game/ Movie Change the aspect ratio. 16:9/ Auto/ Widescreen/ 4:3/ Zoom Press 0~9 and “-” to select a channel.
Using the TV Features ViewSonic 15 Button Subtitle 16 Index 17 18 HDMI Video 19 Mute 20 Source 21 22 Pre PR Exit 23 Display 24 PR +/- 25 Dual 26 Size 27 Subpage 28 Hold 29 Reveal 30 31 PC TV Description Press to select Off or On function of subtitle, when the input source is available for subtitle. Press to return to page 100 or the index page; and then press 0 to 9. The teletext page will be numbered and added to the page you select or the secondary item.
Using the TV Features Button A J K B C D E F G ViewSonic G L IF Rotate Thumbnail Repeat Zoom +/H 22 Description Use below buttons when you play music or video file by USB device. (JPEG, BMP, PNG, MPEG1, MPEG2, MPEG4, MP3, M4A) Forward / Quick forward Search or select previous chapter or track. Backward / Slow backward Search or select next chapter or track. Play and pause Rotate the photos. Make the photos as thumbnail. Repeat to play files. (Music or Video) To enlarge or reduce the picture size.
Using the TV Features Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the Power button on the side of the panel. Selecting the TV Signal Source With the TV on, press SOURCE button on either the TV or the remote to choose from: ATV, DTV, HDMI 1, HDMI 2, HDMI 3, HDMI 4 (Side), Component 1, Component 2, AV 1, AV 2 (Side), S-Video, PC, USB. Changing Channels 1. Using Channel List Press Pr List to show all channels. Press ST buttons to select channels.
Using the TV Features Setting the sleep timer The sleep timer lets you select the amount of time before your TV turns off automatically. Press SLEEP button repeatedly to select a sleep timer function on the remote control. You can select: Off, 10 min, 30 min, 60 min, 90 min, 120 min, 180 min, or 240min. To turn off the timer, please select Off. Viewing Subtitle To view Subtitle: Press Subtitle button repeatedly to select.
Using the TV Features On-Screen Display of TV menu Viewing the Menus 1. Press the MENU button to display the OSD main menu. There are six main menus on the screen: CHANNEL, PICTURE, SOUND, TIME, OPTION and LOCK. 2. Press ▲▼ to select your desired menu. 3. Press OK or ► to enter the menu you select. 4. Use ▲▼ to select the control you want to adjust. 5. When selecting the control with ► to enter next level menu or enable the function. 6. Press ◄► to adjust or select the settings. 7.
Using the TV Features Adjusting Picture Settings 1. Press the MENU button to display the OSD main menu. 2. Press ▲▼ to select the “PICTURE” menu. 3. Press ► to enter the sub-menu and use ▲▼ to select the settings. 4. Press ◄► to adjust the settings. 5. Press OK to confirm. 6. Press MENU to return to the previous menu or press Exit to exit the menu. z Picture Mode: Select your desired setting. Standard, Vivid, Personal, Game, Movie.
Using the TV Features Adjusting Sound Settings 1. Press the MENU button to display the OSD main menu. 2. Press ▲ or▼ to select the “SOUND” menu. 3. Press ► to enter the sub-menu, and use ▲▼ to select the settings. 4. Press ◄► to adjust the settings. 5. Press OK or ► to confirm. 6. Press MENU to return to the previous menu or press Exit to exit the menu. z Sound Mode: Select your desired setting. Standard, Music, Movie, Sport, User.
Using the TV Features TIME 1. Press the MENU button to display the OSD main menu. 2. Press ▲ or▼ to select the “TIME” menu. 3. Press ► to enter the sub-menu, and use ▲▼ to select the settings. 4. Press ◄► to adjust the settings. 5. Press OK or ► to confirm. 6. Press MENU to return to the previous menu or press Exit to exit the menu. z Clock: If you have DTV, the Clock will consistent with the input source. Only in the ATV mode, user can set the clock by pressing ▲▼.
Using the TV Features OPTION 1. Press the MENU button to display the OSD main menu. 2. Press ▲ or▼ to select the “OPTION” menu. 3. Press ► to enter the sub-menu, and use ▲▼ to select the settings. 4. Press ◄► to adjust the settings. 5. Press OK or ► to confirm the settings. 6. Press MENU to return to the previous menu or press Exit to exit the menu. z Language: English only z Audio Language: Available for digital channels only, when multiple languages are broadcasted. Lists available audio languages.
Using the TV Features LOCK 1. Press the MENU button to display the OSD main menu. 2. Press ▲ or▼ to select the “LOCK” menu. 3. Press ► to enter the sub-menu, and use ▲▼ to select the settings. 4. Press ◄► to adjust the settings. 5. Press OK or ► to confirm the settings. 6. Press MENU to return to the previous menu or press Exit to exit the menu. Lock System Select On or Off. When On is selected, CHANNEL functions are locked. Only enter the password to access the CHANNEL menu. Set Password 1.
Using the TV Features Parental Guidance (for DTV) 1. Press ► to enter the sub-menu, and then press ▲▼ to highlight Parental Guidance. 2. Press ► to select your desired rating 3. Press MENU to return to the previous menu or press Exit to exit the menu. Australian Parental code Description Rating Off Not Classified P Pre-School C Children G General PG Parental guidance Recommended M Mature Audience 15+ MA (15+) Mature Adult Audience 15+.
Other Information Cleaning the LCD TV • Make sure the LCD TV is turned off. • Never spray or pour any liquid directly onto the screen or case. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
Other information Troubles Shooting Please contact ViewSonic service team directly if you have questions, service needs, or require technical assistance related on the use of your television. Contact ViewSonic Service Team at: http://www.viewsonic.com.au/support/ Or call our service team: Australia: 1800 880 818, Problem No power Possible Solution z Make sure the power cord is properly connected LCD TV AC power socket. z Make sure the AC power cord is properly connected to the wall outlet.
Other information Problem Remote control unit does not operate Possible Solution z Make sure the directions of batteries are inserted correctly referring to the user guide. z Batteries could be weak or dead. Replace by new batteries. z Is a fluorescent light illuminated near the remote control sensor? z The path of the remote control beam may be blocked. Make sure the path is clear and that the remote control is aimed at the remote control sensor on the TV.
Other information Specifications Model LCD Type Colour Filter Glass surface Input signal RGB RF Video Audio Compatibility Resolution PC Recommended and supported (VGA mode) Speaker Output Operating conditions Storage conditions Dimensions (with stand) Weight (with stand) Regulations Power consumption r N4290p 42.02” TFT Active Matrix RGB 0.1615(H)x0.4845(V) mm pixel RGB vertical stripe Anti-Glare RGB analog (0.7/1.0 Vp-p, 75 ohms) Sync, fh: 31.
Other information Limited Warranty VIEWSONIC® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Other information Index ▲▼◄► buttons 20 0~9, - number buttons 20 N O A AC input 12 AV Audio input 12 AV/ S-Video signal Audio input 12 Aspect button OK button 20 P PC Audio input 12 Power LED Indicator 11 Power ON/OFF button 11, 20 B Q C R CC button 21, 23 CH Down button 11, 21, 22 CH Up button 11, 21, 22 Composite Video input 12 Remote Control Receiver 11 Remote Control and TV Control 19-23 S EPG button 21 S-Video Audio input 12,13 S-Video input 12,13 SLEEP button 20, 23, Storing Channels int
ViewSonic ®
