ViewSonic ® N4251w LCD TV - User Guide - Guide de l’utilisateur - Guía del usuario ViewSonic ® Model No.
Compliance Information .................................................................................. 1 Declaration of RoHS Compliance ................................................................... 2 Important Safety Instructions .......................................................................... 3 Copyright Information ...................................................................................... 4 Product Registration ................................................................
ENGLISH Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% 0.01% < 0.01% 0.
ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
Copyright Information Copyright © ViewSonic Corporation, 2006. All rights reserved. ® Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice.
ENGLISH Antenna Installation Instructions 1.
Getting Started Congratulations on your purchase of a ViewSonic® LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents • LCD TV • Power Cord • VGA Cable • Quick Start Guide ENGLISH Your LCD TV package includes: • Remote Control with batteries • RCA A/V Cable • ViewSonic User Guide Fixing ViewSonic LCD TV to the Wall The LCD TV can be wall-mounted or freestanding.
ENGLISH Front View of the Product ENTER To highlight a control in OSD menu. CH Up Channel up when source is at TV or select a control while in OSD menu. CH Down Channel down when source is at TV or select a control while in OSD menu. Menu Turn OSD menu ON/OFF. Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu.
ENGLISH Rear View of the Product Power (AC input) Using power cord provided, connect to a power source. Air TV input Connect to NTSC or ATSC TV source. Cable TV input Connect to Cable TV (CATV) or Digital Cable. SPDIF Optical output Connect this port to the SPDIF input of A/V device. HDMI Input Terminal -3 Connect this port to the HDMI output of A/V device. HDMI Input Terminal -2 Connect this port to the HDMI output of A/V device. HDMI Input Terminal -1 Connect this port to the HDMI output of A/V device.
ENGLISH Remote Control ViewSonic 9 N4251w
A SOURCES Select input source B PIP * PIP: activate PIP feature PIP Source: change PIP source PIP Size: change PIP size C 0~9, -/100 number button Input channel number D RECALL Return to previous channel E GUIDE Show electronic program guide (EPG) F SLEEP * Set timer to turn off TV G CC Close Caption H VOL▲ and VOL▼ Adjust volume I MUTE ENGLISH Remote control button function as follow Mute On/Off J MTS/SAP Select Mono, Stereo or SAP sound K POWER Power On/Off L Device buttons Selec
Key “Defaults” The “default” out of box setting enables the Remote to control a predetermine TV, DVD,STB, VCR, VPB, WMA and AUD. ENGLISH • Depending on Device desire the following model will be active. Device Default Setting TV ViewSonic DVD Samsung STB RCA VCR Sony VPB ViewSonic WMA ViewSonic WMA-100 AUD Sony Note: Multiple pre-programmed codes are available for some devices; if default setting does not function, see pre-programmed table for additional codes.
1. Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2. Refer to the Pre-programmed code tables on page 14-19 and write down the code number listed. 3. Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-programmed code. LED will blink to indicate pre-programmed code was captured correctly.
AUX Key Setup The AUX key is used to operate a second TV, DVD, STB, VCR, VPB,WMA, and AUD. A fourth digit is necessary to identify the type of device the key will control. ENGLISH AUX Button = 1 VPB = 5 DVD = 2 WMA = 6 STB = 3 AUD = 7 TV VCR = 4 For example, to control a Sony DVD player with a code of 027 under the AUX key, a 2 must be added in the beginning of the pre-programmed code making it 2027.
Pre-Programmed Code Tables BRAND N1700W N1300 N1500 N1750W N2010 N2010-E N2700W N2750W N3020W N3200W N3200W-E VPW4255 VPW5500 N2000 N3000W CODE 001 002 003 004 005 006 007 008 009 010 011 012 012 014 015 DVD Players-1 BRAND Aiwa Aiba Apex Audiovox Blaupunkt Bose Broksonic Bush Clarion Classic CyberHome Daewoo Dansai Denon Emerson Fisher Funai GE Go Video Goodmans GPX ViewSonic CODE 001, 033, 051, 118 002, 037 046, 059, 060, 062, 063, 084, 085, 086 119 104, 123 113, 117 052 003 097 098 004, 005 006, 124
Grundig ENGLISH STB - Set Top Box BRAND Akai Alba Allsat Alphastar Amstrad Ankaro Anttron Apollo Armastrong Asat Astra Astro AudioTon Best Blaupunkt Brain Wave BSkyB Bush Chaparral CityCom Clatronic Condor Crown Daeryung Dish Network DNT Drake Echostar Einhell Elta Emme Esse Ep Sat Eurosat Eurosky Eurostar Express Vu Ferguson Finlandia Finlux Fuba Fujitsu Galaxis GE General Instruments GMI Goodmans Granada ViewSonic Hanseatic Hirschmann Hisawa Hitachi Hughes Huth Intertronic Janeil Johansson JVC Kathrei
ViewSonic 015 048, 049 019 014 000, 040, 041 044 019 008, 017 006 025 013 005, 035, 057 016, 018 005, 007, 008, 016 012, 021, 022 010, 014 005, 009, 012, 016, 018 015 018, 021, 022, 027 043, 059 051 005, 007, 012 050 010 025 007 006, 017 014 010 018 005, 017 007, 010, 014 008 018 006 002, 003, 004, 006, 025 006, 017 006 036, 042 015 046, 047 010 016 015 016 005 006 016 006, 014, 015 008, 012, 028 033, 037, 052 Cable BRAND ABC Archer Cabletime Contec Eastern France Telecom GE Gemini General Instrument Grun
ENGLISH VCR BRAND Action Admiral Aiko Aiwa Audiovox Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colortyme Craig Curtis Mathes Daewoo Daytron Denon Dimensia Electrohome Emerson Fisher Fuji Funai Gerrard GE Go Video Goldstar Gradiente Harman Kardon Harwood Hitachi JBL ViewSonic CODE 102 101, 144, 145 127 005, 126 122 119 059, 105, 120 122 124, 125 083, 138 131, 151 127, 130 095, 121, 122, 123, 127 096, 117 085, 090, 104,121, 122, 130 077, 079, 114, 117 121, 124, 125, 150 006, 007, 083,
077, 088, 128, 129, 136, 141 Philips 022, 023, 024, 025, 026, 027, 076, 110, 111, 124, 131, 133, 151 Pioneer 078, 103, 118, 128, 142, 146 Portland 083, 138 Precision 102 Proscan 114, 150 Proton 085 Quasar 090, 124, 125 Radio Shack 090, 122, 133, 145 Radio Shack/Realistic 119, 121, 122, 124, 125, 126, 133, 144 Radix 122 RCA 048, 051, 078, 079, 088, 114,115, 121, 124, 128, 129, 136, 141, 148, 149, 150 Realistic 079, 090, 094, 097, 104, 119, 121, 122, 123, 124, 125, 126, 133, 144, 145 Ricoh 143, 147 Runco 135
ENGLISH AUD BRAND Aiwa Akai Bose Carver Curtis Mathes Denon Fisher GE Goodmans Gradiente Harman Kardon Hitachi JBL Jensen Jerrold JVC Kenwood Luxman Marantz Mclntosh NAD Nakamichi NEC Nikko Onkyo Optimus Panasonic CODE 024, 041, 063 013 039 075 065 001, 053, 054, 059, 076 005, 066, 068, 073 030 013 086 002, 025, 052, 070 003, 083 025 085 026, 028 004, 050, 057 005, 055, 058, 072, 080 088 042 082 064 078 064 087 006, 044, 048, 079 065, 071 032, 033, 051, 056, 062, 074, 091 Philips 007, 037, 038, 040 Pionee
Installation ENGLISH 1. Insert Remote Control Batteries 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. CAUTION • Only use the specified AA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings.
ENGLISH 2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV channels into memory with Auto Scan function when using a Cable TV system. The cable input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV) and Digital cable system (clear QAM) can be found by the scanning of “Cable” in the Auto Scan function. (See page 32.) CATV or Digital Cable (not supplied) 3.
3) With YPbPr cable: YPbPr Cable (not supplied) ENGLISH Audio Cable (not supplied) VCR or DVD Player 4) With HDMI-1/ HDMI-2/ HDMI-3 cable: (DVD Player should have the HDMI output terminal) VCR or DVD Player HDMI Cable (not supplied) 4. Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately).
5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). ENGLISH Headphone (not supplied) 6. Connecting to a Computer Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. PC VGA 15 Pin Cable 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV.
8. Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV. ENGLISH Audio Cable (not supplied) A/V Device SPDIF Optical Cable (not supplied) Stereo System 9. Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet.
Basic Operation ENGLISH To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug, and the power LED indicator will light red. Power On/Off To turn the LCD TV on/off: Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV.
ENGLISH DTV Guide Press the GUIDE button on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the ◄ or ► button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for that channel and the window will show the live program for that channel. Press the GUIDE button to exit this feature.
ENGLISH Zoom Press Zoom button repeatedly to select the screen size. You can select from normal, x2, x4, x8, x16, 1/32, 1/16, 1/8, 1/4, and 1/2 sizes. Wide Repeatedly press WIDE button to select the aspect ratio of screen. You can select between No scale, Normal, Full, Wide 1, Wide 2, Wide 3, 4:3, and 16:9. Freeze Picture Press II (Freeze) button to freeze picture. However, the sound still continues. Press II button again to restore.
OSD Functions ADVANCED OPERATION — OSD MENU Video Menu — To adjust the picture quality ENGLISH Video Menu is active in all except the VGA input source. • Contrast: To adjust contrast of video. (right: Max, left: Min). • Brightness: To adjust luminance of video. (right: Max, left: Min). • Color: To adjust color. (right: brilliant color, left: pale color). • Tint: To adjust tint level. (right: greenish tone, left: reddish tone). • Sharpness: To adjust picture sharpness. (right: sharper, left: softer).
Setup Menu — To set up OSD window ENGLISH Setup Menu is active in all input sources. (However, when in VGA input source, there is no “V-Chip” function in the menu.) • Language: To select an OSD language from English, French or Spanish. • Parental: To set up parental control. When you enter this control, the screen below will be displayed. The factory default of the password is “0000”. To enable parental control, input the password, press ▼ button to focus on OK key, and then press ENTER.
Press MENU to return to the previous page. • V-Chip: Press ENTER, and the following screen appears. V-Chip is transmitted from TV station to help parents monitor what their children watch. According to the pre-set of factory, viewers can see all of the channels. However, setting V-Chip can block the appointed channels. The factory default of the password is “0000”. To enable parental control, input the password, press ▼ button to focus on OK key, and then press ENTER. (Select Cancel if you want to exit.
ENGLISH • Block TV Rating: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA. The TV Ratings in the US are defined as following.
CF_E Exempt CF_13ANS This emission can not be appropriate to the children of less than 13 years CF_G General CF_16ANS This emission is not appropriate for less than 16 years CF_8ANS General-Disadvised to CF_18ANS This emission is reserved to the adults the young children Use ENTER button to block or unblock the ratings, and use MENU to exit. • Block MPAA Unrated: To block unrated movies. • Block TV None Rating: To block unrated TV programs.
ENGLISH • Digital Closed Caption: To select closed caption signal formats and set up caption modes for digital TV channels. (C1~C4, Service1~Service 6, or OFF) • Digital CC Style: Press ◄► to select Caption Style from As Broadcaster or Custom. When Custom is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. Font Size: To select a font size from Large, Small, or Medium. Font Style: To select different font style from Style 1 to Style 7.
ADVANCED OPERATION — REMOTE CONTROL PIP/POP PIP/POP button allows you to watch two screens from different sources at the same time. (PIP is picture in picture; POP is picture out of picture.) Press PIP on the remote control repeatedly. The screen will change from normal screen → PIP screen → POP screen. POP Screen ENGLISH PIP Screen • PIP Input Source Select 1. Press PIP Source button to select input source for sub-screen as following. (You must press PIP button first.
Other Information Specifications LCD Type ENGLISH Color Filter Glass surface Input signal RGB 42.02” TFT Active Matrix RGB 0.68 (H) x 0.68 (V) mm pixel RGB vertical stripe Anti-Glare Audio RGB analog (0.7/1.
No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture • The TV station may be experiencing problems. Try another channel. • The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
Customer Support For technical support or product service, see the table below or contact your reseller. ENGLISH Note: You will need the product serial number. Country/ Region Web Site T=Telephone F=Fax Email United States www.viewsonic.com/support/ T= (800) 688 6688 F= (909) 468 1202 service.us@viewsonic.com Canada www.viewsonic.com/support/ T= (866) 463 4775 service.ca@viewsonic.
Limited Warranty VIEWSONIC® LCD TV How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a.
ViewSonic ®
