User guide

10
3-2-2-1.MAIN MENU
DRAWING 18
Press the "Enter" button to enter the submenu,
press it again to return to the main menu.
Main Menu includes:
Image
Display
Audio
System
Language
3-2.ON-SCREEN DISPLAY MENU
3-2-1.HOW TO OPERATE
1. Press the "Menu" button on the Remote
Control or Control Panel to enter the ON-
Screen Display (OSD) menu.
2. When the OSD is displayed, use "Cursor"
buttons on the Control Panel or on the
Remote Control to choose the item you need.
3. Press the "Menu" button again to exit.
3-2-2.PROJECTOR'S OSD
3-2-2-2.IMAGE
◆ Computer Image (RGB)
◆ Computer Image (HDMI & Component)
Brightness: Adjusts the brightness of the image.
Contrast: Adjusts the contrast of the image.
Frequency: Adjusts the frequency to match the
frequency of your computer's graphic card.
Tracking: Synchronizes the signal timing with
your computer's graphic card.
Hor. Position: Moves the image's horizontal
position.
Ver. Position: Moves the image's vertical position.
Image Mode: Chooses a mode you prefer.
Vivid: This mode is good for watching dynamic
pictures.
Normal: This mode is the standard light engine
mode.
Brightness: Adjusts the brightness of the image.
Contrast: Adjusts the contrast of the image.
Image Mode: Chooses a mode you prefer.
Vivid: This mode is good for watching dynamic
pictures.
Normal: This mode is the standard light engine
mode.
Movie: This mode is good for movie pictures.
User: This mode allows you to adjust details of
image. Press the "Right" button to enter the
submenu.
Gamma: Adjusts the Gamma (mid-tone
brightness) curve.
Noise Reduction: Adjusts signal noise
reduction.
DRAWING 19
DRAWING 20
DRAWING 21
Submenu
CONTROL PANEL AND REMOTE CONTROL
Brightness: Adjusts the brightness of the image.
Contrast: Adjusts the contrast of the image.
Color Satur. : Adjusts color saturation of the
image.
Sharpness: Adjusts the sharpness of the image.
Tint: Adjusts the color balance of red and green .
Image Mode: Chooses a mode you prefer.
Vivid: This mode is good for watching dynamic
pictures.
Normal: This mode is the standard light engine
mode.
Movie: This mode is good for movie pictures.
User: This mode allows you to adjust details of
image. Press the "Right" button to enter the
submenu.
Aspect Ratio: Selects your desired aspect ratio.
Zoom: Increases or reduces the size of the image.
Keystone: Adjusts image distortion caused by
tilting the projector.
Color Temperature: Adjusts the color
temperature of the image. A higher color
temperature looks cooler. A lower color
temperature looks warmer. When the color
temperature is set to User mode, press "Down"
3-2-2-3.DISPLAY
◆ Video Image (S-Video, Composite)
DRAWING 22
Movie: This mode is good for movie pictures.
User: This mode allows you to adjust details of
image. Press the "Right" button to enter the
submenu.
Edge Enhancement: Adjusts the overall
sharpness of the video signals.
Gamma: Adjusts the Gamma (mid-tone
brightness) curve.
Noise Reduction: Adjusts signal noise
reduction.
&LQH 9LHZ6RQLF
Image Display
Audio
System
Language
Brightness
Contrast
Frequency
Tracking
Hor. Position
Ver. Position
Image Mode
Vivid Normal Movie User
50
50
50
50
50
50
Image Display
Audio
System
Language
Brightness
Contrast
Frequency
Tracking
Hor. Position
Ver. Position
Image Mode
Vivid Normal Movie User
50
50
50
50
50
50
Image Display
Audio
System
Language
Edge Enhancement
Gamma
Noise Reduction
50
1
5
Image Mode Setting
Press "Enter" key to go back main menu.
Image Display
Audio
System
Language
Brightness
Contrast
Image Mode
50
50
Vivid Normal Movie User
Image Display
Audio
System
Language
Brightness
Contrast
Color Satur.
Sharpness
Tint
Image Mode
50
50
50
50
50
Vivid Normal Movie User
Press "Right" key to set the User mode.