User guide

8
INSTALLATION
2-2.ADJUSTING THE PROJECTED
IMAGE
2-2-1.ADJUSTING THE PROJECTED
HEIGHT
1. Press the Elevator buttons. (Drawing 3)
2. Raise the projector to the desired display
angle, allowing the legs to extend, release
the buttons to lock them in position.
3. Use the Adjustable foot (Drawing 5) at the
rear of the unit to fine-tune the display angle.
4. Use the "Keystone" button on the Remote
Control or in the projector's OSD to correct
any distortion caused by tilting the projector.
5. There are two adjustable directions shown on
the screen, one is vertical keystone
correction, the other is horizontal keystone
correction, use the cursor buttons to select
the Vertical or Horizontal Keystone correction.
(Drawing 10 and Drawing 11)
Press "Right" cursor for increasing the value.
Press "Left" cursor for decreasing the value.
(Drawing 9)
DRAWING 9
DRAWING 10
DRAWING 11
Keystone
Ver. Keystone
Hor. Keystone
0
0
2-2-2.ADJUSTING THE ZOOM and FOCUS
Rotate the Zoom ring to adjust the image size. Rotate the Focus ring to focus the image. The projector will
focus at distances from 1.5m (60in. / 5 ft.) to 10m (394 in. / 32.9 ft.). The optimum distance is from 1.5 m to 5
m (197 in. / 16.5 ft.).
DRAWING 12
Zoom Ring
Focus Ring
Ver. Keystone
Hor. Keystone
2-2-3.ADJUSTING THE PROJECTED IMAGE SIZE
0
38"
51"
77"
128"
179"
33"
44"
66"
109"
153"
175"
219"
204
"
255"
1.5m
2.0m
3.0m
5.0m 7.0m
8.0m
10.0m
Distance To Screen (Meter/Inch)
Max. Screen Diagonal (Meter/Inch)
Min. Screen Diagonal (Meter/Inch)
1.5/60
0.98/38
0.83/33
2.0/79
1.30/51
1.11/44
3.0/118
1.94/77
1.67/66
5.0/197
3.24/128
2.78/109
7.0/276
4.54/179
3.89/153
8.0/315
5.18/204
4.44/175
10.0/394
6.48/255
5.55/219
2-3-1.CONNECTING TO A PERSONAL COMPUTER
1. Use the cable to connect your Notebook to the projector. (Drawing 14)
2. Press the "Monitor Output" function key of your Notebook.(Fn+ or or or )
3. The projector will automatically detect the source. If not, please press the "Source" button on the Control
Panel of the projector or on the Remote Control to select the computer source.
VGA
DRAWING 13
◆ Connecting to a Notebook
DRAWING 14
Computer signal input
VGA cable
LCD
2-3.OPERATION
&LQH 9LHZ6RQLF