VOT133 PC Mini User Guide Model No.
Preface Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
systems according to local law. If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead. FCC Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read these instructions completely before using the equipment. Keep these instructions in a safe place. Heed all warnings. Follow all instructions. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury
Copyright Information Copyright © ViewSonic® Corporation, 2011. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation. Award® is a registered trademark of Phoenix Technologies Ltd.
Table of Contents Chapter 1 Introducing the PC Mini Top View............................................................................................................ 2 Front Side View................................................................................................. 2 Back Side View................................................................................................. 3 Bottom View.....................................................................................................
Chapter 1 Introducing the PC Mini The PC Mini is a compact and easy to use desktop. It features all the desktop capabilities but with a slim body design which enables your to browse the internet in a relax and comfortable way.
Introduction PC Mini features all the desktop capabilities but with a slim body design which enables you to browse the internet in a relaxable and comfortable way. 1-1 Top View 190mm 135mm 1-2 Front Side View 24mm 1 2 3 4 5 6 7 No. Name Description 1 Headphone Port Connects to a headphone 2 Microphone In and S/PDIF In Port Connects to a microphone or playback devices with optical connectors(3.5mm jack) 3 Multi-Function Card Reader Support SD/SDHC/MS/MS Pro/MMC memory cards 4 USB 3.
1-3 Back Side View 1 2 4 3 5 6 7 No. Name Description 1 RF(Radio Frequency) Port Connects to antenna 2 USB 2.0 Ports Connects to USB devices 3 DVI Port Connects to display device 4 HDMI Port Connects to HDMI audio and video 5 Network Port Standard RJ-45 network port 6 Line Out and S/PDIF Out Port Connects to powered analog speakers or recording devices with optical connectors(3.5mm jack) 7 Power Input Port Connects to the power adapter 1-4 Bottom View 1 No.
Chapter 2 Placing and connecting the PC Mini In this chapter, the placement and the connection of some necessary peripherals will be introduced.
2-1 Placement of PC Mini 1. On the Desk 1. You can install your PC Mini in the mount like the right image. 2. If there is enough space on your desk, you can simply put your PC Mini on the tabletop as shown below. 2-2 Connection of PC Mini 1. Connect the Antenna Connect the antenna to the RF port of the PC Mini. You can fold the antenna and rotate it in different angle as you want.
2. Connect the Monitor Connect a VGA to the PC Mini through DVI/VGA adapter. 3. Connect the USB Devices Connect USB devices to the USB ports of the PC Mini, for example, mouse and keyboard. 4. Connect the Network Cable Connect LAN cable to the RJ-45 port, with the other end connected to a hub or switch.
5. Connect the Power Cord Connect the power adapter to the power input port of the PC Mini, and push the power button to start it. 1 Outlet 3 CA UT IO N 2 ! The power adapter is dissipating heat during normal use, please make sure not to cover it and keep it away from your body to prevent discomfort or injury from heat exposure.
Chapter 3 Install Windows 7 in PC Mini This chapter introduces the Windows installation : This chapter includes the following information: ■ Install Windows 7 ■ Install Drivers in Windows 7 Note: Skip this section, if you have purchased a PC Mini model with Windows 7 pre-installed.
Make sure you have these ready : 1. VDD100 . (It is an optional accessory. If there is no VDD100 in this package, you need other purchase an external USB DVD-ROM drive.) 2. PC Mini driver CD. (In this package) 3. Windows 7 Install CD. (Other purchase) Before we continue : ■ ■ Your PC Mini power is off. Connect the VDD100 or USB DVD-ROM drive to one USB port of PC Mini and power it on. 3-1 Install Windows 7 1. Push power on button to turn on your computer, then press key to enter BIOS Setup. 2.
4. The computer will reboot, and it will start loading the files for installing the Windows 7 Operating System. 5. After the computer reboots it will start loading the files for installing Windows 7. Click “Next” to continue and click “Install now” button to start the setup. 6. When the license terms appear choose accept and click “Next” to continue. 7. It will then ask you to select the installation type. Click “Custom (advanced)” to install a new copy of Windows. 8.
9. In the hard disk size screen, you can click the “new” button to create partitions as you need. In this example we are creating a 70GB partition to install Windows. Make your modifications and click “Apply”. To ensure that all Windows features work correctly, Windows might create additional partitions for system files. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click “Next” to continue.
10. The setup program will then start to install Windows 7 on your hard disk. During the installation, your computer will restart several times. 11. When the installation is complete, setup will prepare your computer for it’s first use. You can then follow the steps to select system settings, create an account, set a password...etc, until the whole process is complete.
3-2 Install Drivers in Windows 7 1. When the Windows 7 is completely installed, you have to install the necessary drivers before using the PC Mini. Take out the Windows 7 Install CD from the USB DVD-ROM drive, and put the PC Mini driver CD inside. 2. Waiting for a few seconds, the main menu will be displayed on the screen. 3. Use these options to install all the drivers for your system. You must click "AMD Chipset Driver" to install it first.
Chapter 4 Specifications Feature Specifications Processor • AMD Zacate Dual core CPU Chipset • AMD Hudson D1 Memory • 1x SO-DIMM Socket, support DDR3 1066 up to 4GB Graphic • AMD Radeon HD 6310 HDD • 1x 2.5" SATA II 3Gb/s ODD • VDD100 CD/DVD RW drive (Optional) Front IO • 1x SD/SDHC/MS/MS Pro/MMC 5 in 1 Card Reader 2x USB 3.0 • 1x Mic in (support S/PDIF-IN) • 1x Headphone • 1x RJ-45 (10Base-T/100Base-T/1000Base-T) 4x USB 2.0 • 1x Line-out jack.
Chapter 5 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website Australia/New Zealand www.viewsonic.com.au Canada www.viewsonic.com Europe Hong Kong India www.viewsoniceurope.com www.hk.viewsonic.com www.in.viewsonic.com Ireland (Eire) www.viewsoniceurope.com/uk/ T = Telephone Email F = FAX AUS= 1800 880 818 service@au.viewsonic.
Limited Warranty VIEWSONIC® PC MINI What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
