ViewSonic ® VNB107 ViewBook - User Guide - Pyководство пользователя - 使用手冊(繁中) - 使用手冊 (簡中) - 사용자 안내서 - ﺪﻠﻴﻞ ﺍﻠﻤﺴﺘﺨﺪﻢ Model No.
Compliance Information CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Important Safety Instructions 1. DO NOT press or touch the LCD Screen. DO NOT place notebook PC with small items, they may scratch LCD Screen or penetrate the vents of notebook PC. 2. DO NOT expose notebook PC to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place notebook PC on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of notebook PC. DO NOT shove any foreign objects into notebook PC. DO NOT close with force the LCD Screen lid. 5.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation.
Contents Chapter 1: Preparing the netbook for use Package contents.......................................................................1 Insert the battery.........................................................................1 Connect the power adapter........................................................1 Chapter 2: Turning on the VNB107 Top View with the lid open..........................................................2 Turn on the VNB107............................................................
User's Guide Dear customer! Thank you for choosing ViewSonic’s VNB107 netbook. Your VNB107 has powerful information processing capabilities and mobile characteristics. Whether you are in the office, at home, or travelling, VNB107 is your effective assistant that accompanies you all the time. This manual will help you master the methods and techniques of using VNB107 to the best. Chapter 1 Preparing the netbook for use NO.1.
Chapter 2 Turning on the VNB107 NO.2.1 Top View with the lid open Open the lid of your VNB107. Please be careful when opening or closing the lid; do not do it with excessive force as you can damage the netbook. VNB107 appearance NO.2.2 Turn on the VNB107 Make sure both the battery and the power adapter are connected to the netbook and to wall AC power outlet. Press the Power button for one second to turn on the netbook.
NO.2.
Chapter 3 Configuring BIOS, installing an operating system and drivers NO.3.1 Installing an operating system Before installing OS, you will need to set up BIOS to allow boot from USBCD/DVD drive. To do that, turn on VNB107, and press F2 when prompted to run BIOS setup.
NO.3.2 Other settings of the Setup CMOS Utility Main Menu: Here you can set the system’s date and time, as well as check system information like BIOS version, embedded controller firmware version, motherboard version, and the amount of the system memory and extended memory. • Sata Port: the settings specific to SATA devices can be done here. The specific operation can be found in the System promoted screens.
Advanced Menu: you can make the following settings. • Legacy USB: set if a USB device can be used under DOS. • Summary Screen: set if you would like to see system configuration information each time you boot your VNB107. • Boot-time Diagnostic Screen: choose between the image wallpaper mode and text information mode during the POST process. • PXE OPROM: Set up if your VNB107 can be booted from LAN. • Sata Controller Mode Option: setup the working mode of your HDD.
Security Menu: security settings to enter the system. • Supervisor Password: defines if a supervisor password is asked when entering the BIOS Setup Utility. • User Password: defines if a user password is asked when entering the BIOS Setup Utility. • Set User Password: used to define the User Password. • Set Supervisor Password: used to define the Supervisor Password, which authority is higher than that of the User Password. • Password on Boot: defines if a password is required to startup the VNB107.
Exit Menu: options for exiting the BIOS Setup Utility after you have made changes to the settings. • Exit Saving Changes: to store the values and exit. • Exit Discarding Changes: to exit without storing the values. • Load Setup Defaults: to restore the settings to their factory values. • Discard Changes: to abandon all the settings done during current session, yet to remain in the BIOS Setup Utility. • Save Changes: to save the settings. NO.3.
Chapter 4 Devices and interfaces NO.4 Expand the interface devices NO. Item 1 DC-in jack 2 VGA port Description Power jack for AC-DC adapter To connect to an external monitor or projector To connect USB devices, such as pen drives, printers, 3 USB port etc.
Chapter 5 Control Center Functions NO.5 Using the Control Center You can search for all kinds of system information through the Control Center, conduct the system settings and view the help information. [Note]: To enjoy the functionality of the Control Center, please install it from the Driver disc bundled with the VNB107. The Control Center can have some modifications and thus be different from the description herein.
System Information Click on the System Info icon on the home-page of the Control Center to see the VNB107 basic system information. [Note]: Click on the drop-down menu in the lower right corner of the window for more information. Click on the Battery icon on the home-page of the Control Center to view the system power supply information and change the auto-warning settings.
Click on the Cooling Control icon on the home-page of the control center to view the relevant CPU and fan information. Click on the Display icon on the home-page of the Control Center to do the display settings and adjust the brightness of the LCD back light. To adjust the settings of the externally connected monitor, click on the external monitor icon first to select it, then click on the Switch button. [Note]: The Control Center would maximum show two display devices simultaneously.
Click on the Shortcuts icon on the home-page of the Control Center to select the applications you want to be run when you press function key combinations. You can also restore the settings to their factory defaults. Click on the Profile icon on the home-page of the Control Center to set up different power profiles.
Windows Vista operating system Click on the Device Control icon on the home-page of the Control Center to enable/disable certain modules of your VNB107. [Note]: The picture you would see here may be different due to hardware differences across models.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-1202 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty VIEWSONIC® NETBOOK What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
