VMP73 Network media player - User Guide - Guide de l’utilisateur - Guía del usuario - Bedienungsanleitung - Guida dell’utente 3RGUĊF]QLN XĪ\WNRZQLND 3\ɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ - Användarhandbok - ٺҢЙы Model No.
&RPSOLDQFH ,QIRUPDWLRQ &( &RQIRUPLW\ IRU (XURSHDQ &RXQWULHV The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. )ROORZLQJ LQIRUPDWLRQ LV RQO\ IRU (8 PHPEHU VWDWHV The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
'HFODUDWLRQ RI 5R+6 &RPSOLDQFH This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
&RS\ULJKW ,QIRUPDWLRQ © Copyright ViewSonic Corporation, 2010. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Safety Instructions This product has been engineered and manufactured to assure your personal safety. However, improper use can result in potential electric shock or fire hazards. In order not to defeat the safe-guards incorporated in this instrument and its accessories, please adhere to the following instructions when installing, operating and servicing. Power Source Warning A marking label attached on the rear side of the adapter (supplied) indicates the correct power source for this equipment.
Usage Warning To reduce the risk of electric shock, do not remove the cover or attempt to disassemble this product. There are no user-serviceable parts inside. Please refer all servicing to qualified service personnel. Protect this product from foreign objects. Never push object of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Do not expose this product to liquids, rain or moisture.
Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Copyright Notice z No part of this user’s manual may be copied, translated, or reproduced including electronic form without permission from the copyright owner. We have made effort to ensure the accuracy and completeness of this document.
Table of Contents 1 Introduction ........................................................................ 1 Package Content ...................................................................... 1 Specification ............................................................................ 2 Front View ............................................................................... 3 Back View ................................................................................ 3 Remote Control .....................
1 Introduction THE PRODUCT is a high-definition multimedia player and streamer connecting to the external USB hard drives and your HD TV, bringing PC and internet entertainment to the living room. THE PRODUCT is also a BitTorrent downloader with built-in BitTorrent engine. It downloads media files into the attached USB hard drives corresponding to the BitTorrent seeds already saved on the USB drive. Playing and downloading your favorite media files is now PC-free.
Specification Interfaces Video Output HDMI、Composite Video Audio Output Audio L/R、S/P DIF (Optical) Data Transfer e-SATA、USB x 2、Ethernet Port General Specifications MPEG1 (AVI/MKV/TS/DAT/MPG/MPEG/VOB) MPEG2 (MKV/DAT/MPG/MPEG/VOB/ISO/IFO/TS/TP) /M2TS MPEG4 (AVI/MP4/MKV/MOV/WMV/ASF) DivX 3/4/5/6、Xvid (AVI/MKV/MP4/MOV) Video H.
Front View ① Power Press to turn the VMP73 mini on. ② Network LED The LED blinks when VMP73 mini accesses to Network. USB Port ③ Plug the supported USB devices into USB ports, such as USB hard drives, cameras, camcorders. Back View ① ② DC IN AUDIO VIDEO Connects to the DC output of the power adapter. L/R/ Connects to the display with the VIDEO IN/ AUDIO L/R IN jacks on the display using VIDEO (Yellow)/ AUDIO L (White)/R (Red) cables.
Remote Control Press to turn on the THE PRODUCT; press again to switch POWER to stand-by mode. MUTE Press to mute the sound. Numeric Buttons 0-9 number keys for selecting desired options. GOTO Video/movie chapter and time point selection. Display the information of media files while in play mode. BACK Return to the previous display. VOL + / - Increase/decrease the volume. CH + / - Reserved keypad for further application. HOME Hot key to the main OSD menu.
2 Installation Cable Connections Match the cables to the connections on your TV or display. Your choices of connection include: HDMI For both audio and video output RCA Cable For composite video (yellow) and stereo audio (white and red) S/PDIF For audio output Internet Connections Connect the THE PRODUCT to the home network through wired LAN.
Plug the Ethernet cable to the “LAN” jack on the rear panel of THE PRODUCT, for wired Internet connection. THE PRODUCT will detect the network automatically.
Power Cord Connection Plug one end of the power cord into the back of the THE PRODUCT and the other end into a power outlet. THE PRODUCT will start automatically without pressing any other button once the power is connected. Switch your TV Input/Source After choosing the desired video and audio connection, you need to select appropriate video input mode using the remote control for your TV/display to switch to the corresponding video output by pressing the Input/Source button on the remote control.
3 Network Connections ▲ Network Connections: needed only when using “PC Media”, and “Torrent Download ” features. If your wired network equipment such as the IP Sharing router or AP (Access Point), uses DHCP to assign IP address, by default the THE PRODUCT will automatically request the IP and other related information to set up THE PRODUCT over the network in DHCP mode (under Setup> Network >Wired).
Wired Network Setup > DHCP + To access “Setup” on the main menu. Select “Network”. Select “Wired” on the Network menu. Select “DHCP”. + To implement DHCP network setting. THE PRODUCT will automatically receive its IP address from a DHCP sever that is built into the access point or IP sharing router.
Select “Wired” on the Network menu. Select “Static IP”. + Input the value IP Address, Subnet mask, Gateway, and DNS text box respectively. PS: Please acquire information of these setting values from your ISP（Internet Service Provider）first. File sharing (Simple NAS) This function allow THE PRODUCT as a simple NAS device, you can access folders located on THE PRODUCT for viewing, renaming, moving and deleting by networking from your remote computer.
File sharing Configuration To activate this feature, please make sure: The THE PRODUCT is connected to the network; The network is properly set up. For more information on this part, please refer to “Step 2” in “Setting up THE PRODUCT” section, and “Network” under “Setup Menu”. To allow the THE PRODUCT to access folders on your computer, you need: 1) THE PRODUCT already connected to the network 2) to designate the folders/files on your PC as shared resources.
Step 3: You may now specify a “Share Name”, which will be used for users on the network to access the shared folder. The icon of the shared folder will be changed to showing a hand holding the folder. If your operating system is Windows Vista, please refer to the following instructions: (1) Open the Control Panel and then open Network and Sharing Center. (2) Click the down arrow to the right of File Sharing to expand it. (3) Click Turn on file sharing and then click Apply.
File Sharing Configurations (With Windows Vista) File sharing involves making the media content of one or more files / folders (on your PC) available through the network. By “enabling” this file sharing, you can view these files / folders (on your PC) to be accessed / viewed on your THE PRODUCT (on the same network). Caution: File sharing may lead to security problems since, by definition, it gives other users access to the content of a part of the hard drive.
How to share file folder in Windows 7 (1) run "local security policy" applet under administrative tools.
4 Play Media > HDD Media THE PRODUCT searches and plays all available images, music and video files on the external USB device. Note: Depends on the specification of USB that each USB port provide 0.5A to USB device, please use with extra power-provided USB device if the USB device needs more electricity. > DVD THE PRODUCT supports external DVD Drive. (Current version supports Lite-On DVD Drive) > PC Media Connect THE PRODUCT to your PC using a Ethernet cable.
Remote Description + Select/cancel the files which will be added. Rename/delete file. Note: For the files added to the playlist, THE PRODUCT will categorize the media files with video/music/photo tags. Playlist cannot be save except on USB media and do not allow for playback of networked media. > File Search File search allows you to find the file you want by typing related key word on the screen keyboard. Remote + 9LHZ6RQLF Description To access Video, Audio, Photo on the main menu.
Video Playback Remote Description To access Video on the main menu. + Navigate the media file you want to play. The preview window will show the highlighted video. Rename /Delete file. + Add selected file to Playlist. Return to previous display. Full screen mode. Full Screen Mode Remote Description Play/pause selected file. Rewind/Forward Slow motion. Return to previous file. / Go to next file. To adjust the size of the subtitle.
Music Playback Remote Description To access Music on the main menu. + Navigate the media file you want to play. The preview window will show the file details of highlighted file. Rename /Delete file. + Add selected file to Playlist. Return to previous display. Play selected file. Play/pause selected file. Rewind/Forward Stop playback and return to the previous display PS Music will continue playing as the background music when you leave MUSIC PLAYBACK menu. Press 9LHZ6RQLF 18 to stop playing.
Photo Playback Remote Description To access Photo on the main menu. + Navigate the media file you want to play. The preview window will show the file details of highlighted file. Rename /Delete file. + Add selected file to Playlist. Return to previous display. Full screen mode. Full Screen Mode Remote Description Previous picture. / Next picture. Rotate the viewing picture counterclockwise Rotate the viewing picture clockwise. Leave full screen mode.
5 Bonus Features Torrent Download To activate this feature, please make sure: The THE PRODUCT is connected to the network; The network is properly set up. For more information on this part, please refer to “Internet Connections” in “Installation” section, and “Network” under “Setup Menu”. Caution: Please do not download illegal files or contents. Caution: Strongly suggests to use another HDD for Torrent Download, DO NOT use the HDD that mixed important information.
Step 2: Choose either from the external hard drive or the remote PC that you can search and implant the .torrent seeds. Note: Please make sure torrent seeds are already imported to the external hard drive or on the network PC before downloading media files associated with the .torrent seeds to your PC or USB devices. Files cannot be downloaded if there is less than 10% of the capacity left on the USB drive. Step 3: Select .torrent files to download, and then you can see the download process page.
6 File Copy This function is for files management that allows you to copy and move files from the HDD device to another one or from the HDD device to remote PC or from remote PC to the HDD device. Remote Description + To access File Copy on the main menu. To choose the source on source list, and select the + + files. + To choose the destination on destination list. Performing the copy / move function.
7 Setup Audio Remote Description Enter “Audio” setup menu. Select the item for adjustment. Confirm the change. Return to previous display. Item Options Night Mode On/Off Digital Output HDMI LPCM HDMI RAW S/PDIF LPCM S/PDIF RAW LPCM / RAW Mode LPCM mode means decode audio then down-mix to 2 CH output. RAW mode means no audio decoding, just by pass through to amplifier for audio decoding.
AUDIO SETUP-“Night Mode” (aka Dynamic Range Control) When the Night Mode is enabled the sound level of compatible audio soundtracks will be dynamically compressed. Dynamic range control (DRC) increases low-level audio content (such as the dialog in the movies), making it easier to be heard at low volume levels while reducing the intensity of higher-level audio content at the same time.
System Remote Description Enter “System” setup menu. Select the item for adjustment. Confirm the change. Return to previous display. Item Options English/ Traditional Chinese/ Simplified Chinese/ French/ Spanish / German/ Russian/ Swedish/ Italian/ Polish/ Romanian Subtitle Encoding Unicode(UTF8)/ 簡體中文(GBK)/ 繁體中文(BIG5)/ Menu Language Western/ Turkish/ Central European/ Greek/ Cyrillic/ Hebrew/ SE European.
8 Troubleshooting The following reference list represents situations that you may encounter, and methods for remedy. Please refer to this checklist prior to contacting qualified service personnel. Symptom No picture is displayed. Remedy z Check the power cord connection. Or connect the power cord to another power outlet. z Are the VIDEO/ AUDIO cables or HDMI Cable loose or disconnected? Make sure one of connections is correct.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ 5HJLRQ Australia/New Zealand Web Site Telephone Email www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-1202” service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.
Limited Warranty 9LHZ6RQLF 1HWZRUN 0HGLD 3OD\HU :KDW WKH ZDUUDQW\ FRYHUV ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
