Service manual

5 After making adjustments, press the [1] button exit the screen, must out the OSD

then will save the menu.

Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate

waviness and distortion. Press the [2] button to obtain a sharper image.

NOTE: Auto Image Adjust works with most common video card. If using the function

does not work on your display, Lower the video refresh rate to 60 Hz and

try again. (See computer or graphic card user guide to adjust refresh rate.) The

panel may be manually tuned using the horizontal and vertical phase controls

shown below.

Contrast adjust foreground white level of screen image.

[ϧ] increase contrast, ˮϰ] decrease contrast.

Shortcut: Before displaying the OnView menu, press the [ϰ] or [ϧ] button to adjust. Press button [2]

to toggle between brightness and contrast.

1 : Exit 2 : Brightness

- :

+ :

Contrast

Auto Image Adjust

Main Menu

Contrast/Brightness

Audio

Color Adjust

Information

Manual Image Adjust

Setup Menu

Memory Recall

1 : Exit 2 : Select

ViewSonic Corporation

Confidential – Do Not Copy

VG800b