VG2448-PF Display User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Thank you for choosing ViewSonic® As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Safety Precautions Please read the following Safety Precautions before you start using the device. • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Sit at least 18" (45 cm) away from the device. • Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation. • Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation. • Do not use the device near water.
• When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED. • Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible. • Only use attachments/accessories specified by the manufacturer.
Contents Safety Precautions........................................................ 3 Introduction................................................................. 7 Package Contents....................................................................................................7 Product Overview....................................................................................................8 Initial Setup.................................................................. 9 Installing the Stand......
Appendix.................................................................... 47 Specifications.........................................................................................................47 Glossary.................................................................................................................49 Troubleshooting....................................................................................................54 Maintenance.........................................................
Introduction Package Contents • • • • • Monitor Power cord Video cable USB cable Quick start guide NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.
Product Overview Front View Display screen Power button 1 3 5 2 4 (ViewMode) NOTE: For more information about the 1 (ViewMode)/2/3/4/5 key and its functions, refer to “Hot Keys” on page 28.
Initial Setup This section provides detailed instructions for setting up your monitor. NOTE: The monitor comes packaged in a user-friendly box to make installation easy. Installing the Stand 1. Place the box on a flat, stable surface and open the front flap of the box to reveal the contents. Remove the top tray. 2. Remove the monitor stand’s base and neck. Align and connect the three (3) points on the monitor stand’s base with the monitor stand’s neck. 3.
4. Align and slide the upper hooks of the monitor stand into the stand mounting slots as shown in the illustration below: NOTE: Ensure the stand is secure and the quick release tab positively clicks into place.
5. Using the stand’s handle, lift the device out of the box and into its upright position on a flat, stable surface. NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Wall Mounting Refer to the table below for the standard dimensions for wall mount kits. Maximum Hole pattern Loading (W x H) 14 kg Interface Pad (W x H x D) Pad Hole 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm Screw Specification & Quantity M4 x 10 mm 4 pieces NOTE: Wall mount kits are sold separately. 1. Turn off the device and disconnect all cables. 2. Place the device on a flat, stable surface, with the screen facing down. 3. Push and hold the quick release tab and carefully lift the stand. 4.
5. Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm). 100 mm 100 mm 6. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
Using the Security Slot To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. Below is an example of setting up a security slot locking device on a table.
Making Connections This section guides you on how to connect the monitor with other equipment. Connecting to Power 1. Connect the power cord to the AC IN jack at the rear of the device. 2. Connect the power cord plug to a power outlet.
Connecting External Devices HDMI Connection Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer. NOTE: The monitor is equipped with one HDMI 1.4 port.
DisplayPort and miniDP Connection Connect one end of a DisplayPort cable to the DisplayPort or miniDP port. Then connect the other end of the cable to the DisplayPort or miniDP port of your computer. NOTE: To connect the monitor to the Thunderbolt port (v. 1&2) on you Mac, connect the miniDP end of the “miniDP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.
VGA Connection Connect one end of a VGA cable to the VGA port of the monitor. Then connect the other end of the cable to the VGA port of your computer.
USB Connection Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer. NOTE: The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines: • Four (4) USB Type A ports: Connection for your Type A peripheral device (s). (i.e. storage device). ͫ NOTE: To activate the USB Type A port, ensure your computer is also connected to the monitor’s USB Type B port.
Using the Monitor Adjusting the Viewing Angle For optimal viewing, you can adjust the viewing angle using any of the following methods: Height Adjustment Lower or raise the monitor to the desired height (0 to 130 mm). NOTE: When adjusting, press down firmly along the adjustment track.
Tilt Angle Adjustment Tilt the monitor forwards or backwards to the desired viewing angle (-5° to 40°). NOTE: • When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand. • The monitor must be lifted to the highest position, then it can support 40° tilt. Screen Orientation Adjustment (Monitor Pivot) NOTE: The privacy function is only available in landscape orientation. 1. Adjust the monitor height to the highest position.
2. Rotate the monitor 90° clockwise or counter clockwise from landscape to portrait orientation. NOTE: • To rotate the screen image, manually change the system’s display orientation settings. • When adjusting, make sure to hold both sides of your monitor firmly with both hands and rotate the monitor 90°.
Swivel Angle Adjustment Swivel the monitor to the left or right for the desired viewing angle (60°).
Privacy Zone The privacy zone viewing angle is 60° horizontal (Left/Right 30°).
Turning the Device On/Off 1. Plug the power cord into a power outlet. 2. Press the Power button to turn on the device. 3. To turn the device off, press the Power button again. NOTE: The device will still consume some power as long as the power cord is connected to the power outlet. If the device is not being used for a long period of time, please disconnect the power plug from the power outlet.
Using the Control Panel Keys Use the control panel keys to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings. 1 3 (ViewMode) 2 4 5 Quick Menu Press the 2/3/4/5 key to activate the Quick Menu. Viewmode Contrast/Brightness Input Select Main Menu Exit Viewmode Contrast/Brightness Input Select NOTE: Follow the key guide that appears on the bottom of the screen to select Main Menu the option or make adjustments.
Main Menu Exit Contrast/Brightness Adjust the contrast or brightness level. Contrast 70 mode Brightness ast/Brightness 100 Select Menu Input Select Select the input source. D-Sub HDMI s DisplayPort Main Menu Enter the On-Screen Display (OSD) Menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu D-Sub HDMI DisplayPort 1920 X 1080@60Hz Exit Exit the Quick Menu.
Hot Keys Hotthe Keys When On-Screen Display (OSD) Menu is off, you can quickly access special When the off, youpanel can quickly functions by OSD usingmenu the iscontrol keys. access special func�ons by using the control panel keys. Hot Keys NOTE: Some func�ons involve a combina�on of two keys. Key theDescription When OSD menu is off, you can quickly access special func�ons by using the control panel keys. Key Descrip�oninvolve a combina�on of two keys.
OSD Locked OSD Locked Key 2+4 Description Press and hold the keys to lock/unlock the Power button. 1+3 Press the keys to unlock/lock the Power bu�on. When the menu appears on the screen, continue holding both keys When the menu appears on the screen, press and hold both keys for 10 seconds to 1 + 3 forPress the keys unlock/lock Power bu�on. 10 seconds toPower lock/unlock Power button. unlock/lock theto bu�on.
Configuring the Settings General Operations 1920 X 1080@60Hz 1920 X 1080@60Hz Key Guide 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD Menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu D-Sub HDMI DisplayPort 1920 X 1080@60Hz 2. Press the 1 (ViewMode) or 2 key to select the main menu. Then press the 3 key to enter the selected menu.
3. Press the 1 (ViewMode) or 2 key to select the desired menu option. Then press the 3 key to enter the sub-menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Volume On Mute Off Manual Image Adjust Setup Menu 1920 X 1080@60Hz 4. Press the 1 (ViewMode) or 2 key to adjust/select the setting. Then press the 3 key to confirm.
NOTE: Certain menu option adjustments do not require the user to press the 3 key to confirm the selection. Follow the key guide that appears on the bottom of the screen to select the option or make adjustments. VG2448 Input Select Audio Adjust VG2448 ViewMode Color Adjust Manual Image Adjust Input Select Setup Menu Audio Adjust Volume On Volume Mute Off Mute 1920 X 1080@60Hz ViewMode Color Adjust Manual Image Adjust Setup Menu 50 1920 X 1080@60Hz 5.
On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Input Select Menu Option D-Sub (VGA) HDMI DisplayPort Audio Adjust Volume (-/+, 0~100) Mute On Off ViewMode Off Office Web Text 33
Main Menu Sub-menu Menu Option ViewMode CUSTOM 1/2/3 Office Low Input Lag Black Stabilization On/Off (-/+, 0/10/20/30/40/50/ 60/70/80/90/100) Advanced DCR (-/+, 0/25/50/75/100) Response Time Standard Advanced Ultra Fast Hue Saturation Red (-/+, 0~100) Green (-/+, 0~100) Blue (-/+, 0~100) Cyan (-/+, 0~100) Magenta (-/+, 0~100) Yellow (-/+, 0~100) Red (-/+, 0~100) Green (-/+, 0~100) Blue (-/+, 0~100) Cyan (-/+, 0~100) Magenta (-/+, 0~100) Yellow (-/+, 0~100) Rename Recall 3
Main Menu Sub-menu ViewMode Menu Option Movie MAC Mono Game FPS1 FPS2 RTS MOBA Color Adjust Contrast/ Brightness Contrast (-/+, 0~100) Brightness (-/+, 0~100) Color Temperature Bluish Cool Native Warm User Color Color Space Auto RGB YUV Color Range Auto Full Range Limited Range Gamma 1.8 2.0 2.2 2.4 2.6 2.
Main Menu Sub-menu Menu Option Manual Image Adjust Horizontal Size (-/+, 0~100) H./V.
Main Menu Sub-menu Menu Option Setup Menu English Language Français Deutsch Español Italiano Suomi Русский Türkçe 日本語 한국어 繁體中文 简体中文 Česká Svenska Resolution Notice On Off Information OSD Timeout (-/+, 5/15/30/60) OSD Background On Off OSD Pivot 0˚ +90˚ -90˚ Power Indicator On Off Auto Power Off On Off 37
Main Menu Sub-menu Menu Option Setup Menu 30 Minutes Sleep 45 Minutes 60 Minutes 120 Minutes Off ECO Mode Standard Optimize Conserve DisplayPort 1.
Menu Options Input Select 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select Input Select. Then press the 3 key to enter the Input Select menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu D-Sub HDMI DisplayPort 1920 X 1080@60Hz 3. Press the 1 (ViewMode) or 2 key to select the desired input source. Then press the 3 key to confirm the selection.
Audio Adjust 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select Audio Adjust. Then press the 3 key to enter the Audio Adjust menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Volume Mute Audio Input 1920 X 1080@60Hz 3. Press the 1 (ViewMode) or 2 key to select the menu option. Then press the 3 key to enter its sub-menu. 4.
ViewMode Menu NOTE: The ViewMode can also be adjusted with the 1 (ViewMode) key on the control panel. 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select ViewMode. Then press the 3 key to enter the ViewMode menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Off Office Movie MAC Mono Game 1920 X 1080@60Hz 3. Press the 1 (ViewMode) or 2 key to select the setting.
Color Adjust Menu NOTE: Some sub-menus may not be adjustable depending on the user’s custom settings. 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select Color Adjust. Then press the 3 key to enter the Color Adjust menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Contrast/Brightness Color Temperature Color Space Color Range Gamma 1920 X 1080@60Hz 3.
Menu Option Description Color Temperature Select the color temperature setting. • Bluish: Set the color temperature to 9300K. • Cool: Set the color temperature to 7500K • Native: The default color temperature. Recommended for regular use. • Warm: Set the color temperature to 5000K. • User Color: Adjust red, green, and blue values as desired. Color Space Allows users to choose which color space they would like to use for monitor color output.
Manual Image Adjust Menu 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select Manual Image Adjust. Then press the 3 key to enter the Manual Image Adjust menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Auto Image Adjust Horizontal Size H./V. Positian Fine Tune Sharpness Aspect Ratio Overscan Blue Light Filter 1920 X 1080@60Hz 3.
Setup Menu 1. Press the 2/3/4/5 key to activate the Quick Menu. Then press the 4 key to display the OSD menu. 2. Press the 1 (ViewMode) or 2 key to select Setup Menu. Then press the 3 key to enter the Setup Menu menu. VG2448 Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Language Select Resolution Notice Information OSD Timeout OSD Background OSD Pivot Power Indicator Auto Power Off Sleep ECO Mode DisplayPort 1.2 720P60 3.
Menu Option Description Language Select an available language for the OSD Menu. Resolution Notice Informs users that the current viewing resolution is not the correct native resolution. Resolution Notice For best picture quality, change resolution to 3840x2160 Clear Message Information OSD Timeout OSD Background OSD Pivot Power Indicator Auto Power Off Sleep ECO Mode DisplayPort 1.
Appendix Specifications Item LCD Category Type Input Signal Display Size Color Filter Privacy Film Surface Video Sync Compatibility PC Macintosh Recommended Resolution1 Supported Power Adapter2 Display area Operating conditions Storage conditions Specifications TFT, Active Matrix 1920 X 1080 LCD; 0.2745 (H)mm x 0.2745(V)mm pixel pitch 60.5 cm, 24" (23.
Item Dimensions Category Physical (W x H x D) Wall Mount Weight Power Consumption Dimensions Physical On Off Specifications 549.44 mm x 517.03 mm x 202.18 mm (21.65” x 20.37” x 7.97”) 100 x 100 mm 5.9 kg (13 lbs) 25W (Typ.) (Blue LED) < 0.3W Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display. 2 Please use the power adapter from ViewSonic® or an authorized source only.
Glossary This section describes the standard glossary of terms used in all LCD display models. All terms are listed in alphabetical order. NOTE: Some terms may not be applicable to your device. A Advanced DCR Advanced DCR technology automatically detects the image signal and intelligently controls the backlight brightness and color, to improve on the ability to make the black blacker in a dark scene, and make the white whiter in a bright environment.
C Color Range The monitor can detect the input signal color range automatically. You can manually change the color range options to fit the correct color range if the colors are not displayed correctly. Options Auto Description The monitor automatically recognizes the color format and black and white levels. Full Range The color range of black and white levels are full. Limited Range The color range of black and white levels are limited.
G Game Mode Integrates a gaming-oriented On-Screen Display (OSD) design, including: precalibrated FPS, RTS, and MOBA gaming settings. Each mode is functionally customized with in-game testing and adjustments made for the best blend of color and technology. Gamma Allows users to manually adjust the brightness level of the monitor’s grayscale levels. There are six selections: 1.8, 2.0, 2.2, 2.4, 2.6 and 2.8. H H./V. Position Manually adjust the screen image horizontally and/or vertically.
O OSD Pivot Sets the monitor’s On-Screen Display (OSD) Menu display direction. Options 0° +90° -90° Description Sets the OSD Menu without a pivot. Sets the OSD Menu with a +90° pivot. Sets the OSD Menu with a -90° pivot. Overscan Refers to a cropped image on your monitor’s screen. A setting on your monitor zooms in on movie content, so that you cannot see the outermost edges of the film. R Recall Resets the ViewMode monitor settings.
V ViewMode ViewSonic®’s unique ViewMode feature offers “Game,” “Movie,” “Web,” “Text,” and “Mono” presets. These presets are specifically designed to deliver an optimized viewing experience for different screen applications. Y YUV Color Space YUV color space is used for color image and video processing; taking into account properties of the human eye that allow for reduced bandwidth of chroma components without perceptual distortion.
Troubleshooting This section describes some common problems that you may experience when using the monitor. Problem or Issue No power Possible Solutions • Make sure you have turned on the monitor by pressing the Power button. • Make sure the power cord is properly and securely connected to the monitor and power outlet. • Plug another electrical device into the power outlet to verify that the outlet is supplying power.
Problem or Issue The screen appears yellow The OSD Menu does not appear on the screen/the OSD controls are inaccessible Control panel keys do not work Some menus aren’t selectable in the OSD No audio output The monitor will not adjust USB devices connected to the monitor do not work The external device is connected, but no image appears on the screen Possible Solutions • Make sure the “Blue Light Filter” is Off. • Check whether the OSD Menu is locked.
Maintenance General Precautions • Make sure the monitor is turned off and the power cable is unplugged from the power outlet. • Never spray or pour any liquid directly onto the screen or case. • Handle the monitor with care, as a darker-colored monitor, if scuffed, may show marks more clearly than a lighter-colored monitor. Cleaning the Screen • Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
Disassembly Procedure 1. Take out the monitor from the HDPE bage and put the monitor on a protect cushion. Use a Phillips-head screwdriver to remove four screws for unlocking the stand. 2. Use a small slot screwdriver to insert the two gaps(marked as No.1~2) on the bottom side of the rear cover to prize up the rear cover. Use one hand to press the panel module, the other hand to pull up the rear cover in order of arrow preference for unlocking mechanisms of rear cover. Remove the rear cover. 3.
Recommended Spare Parts List Item Category ViewSonic P/N Supplier P/N 1 CB-00012376 50.7AA18.011 2 CB-00012377 50.7AA18.041 CB-00012431 50.7AA18.061 4 CB-00012438 750.A0M02.0001 5 CB-00012379 750.A0M02.0011 6 A-00009891 027.00001.0991 A-00009206 27.01518.G61 A-00009286 27.01518.G71 A-00010028 027.00001.0A11 A-00009401 27.03218.101 11 A-00009208 27.03218.111 12 A-00009338 27.00118.001 13 A-00009205 27.00118.011 14 A-00009377 27.00818.121 CB-00011427 50.7AD05.
Exploded Diagram and Exploded Parts List Product Upgradeability and Repairability The following is a list of hardware features available for at least 5 years after the sale of the product.
Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules.
The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Indian Restriction of Hazardous Substances Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
TCO Information Congratulations! This product is TCO Certified – for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
Ergonomic, User-Centered Design Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets), acoustic performance - protection against sound spikes (headsets) and fan noise (projectors, computers), and ergonomically designed keyboard (notebooks). Electrical Safety, Minimal Electro-Magnetic Emissions Third Party Testing All certified product models have been tested in an independent, accredited laboratory. A detailed criteria set is available for download at: http://www.
Copyright Information Copyright© ViewSonic® Corporation, 2019. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Customer Service For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/ Indonesia www.viewsonic.com/id/ Israel www.viewsonic.
Limited Warranty ViewSonic® Display What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts (e.g.
• • • • • • • • • • • Software or data loss occurring during repair or replacement. Any damage of the product due to shipment. Causes external to the product, such as electric power fluctuations or failure. Use of supplies or parts not meeting ViewSonic’s specifications. Failure of owner to perform periodic product maintenance as stated in the User Guide. Any other cause which does not relate to a product defect.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Mexico Limited Warranty ViewSonic® Display What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How to get service: For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached “Customer Service” page). You will need to provide your product’s serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.
Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Pantone Black C Spot Color Pantone 187 C
