User Guide

34
Manual Image Adjust Menu
1. Press the 2/3/4/5 key to acvate the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 (ViewMode) or 2 key to select Manual Image Adjust. Then press the
3 key to enter the Manual Image Adjust menu.
1920 X 1080@60Hz
VG2448
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Auto Image Adjust
Horizontal Size
H./V. Positian
Fine Tune
Sharpness
Aspect Ratio
Overscan
Blue Light Filter
3. Press the 1 (ViewMode) or 2 key to select the menu opon. Then press the 3 key
to enter its sub-menu.
4. Press the 1 (ViewMode) or 2 key to adjust/select the seng. Then press the 3
key to conrm (if applicable).
Menu Opon Descripon
Auto Image Adjust Automacally adjust the screen image posion.
Horizontal Size Stretch or shorten the screen on its horizontal axis.
H./V. Posion Adjust the screen horizontally and/or vercally.
Fine Tune Improve distorted image quality from an analog signal.
Sharpness Adjust the sharpness and picture quality of the monitor.
Aspect Rao Select the aspect rao of the monitor.
Overscan Enable this opon to automacally enlarge the original picture
horizontally and vercally to an equal aspect rao that lls the
screen.
Blue Light Filter Adjust the lter that blocks high-energy blue light for a more
comfortable viewing experience.
NOTE: Some opons are only available for analog input signals.