VBD100 myViewBoard Direct User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Thank you for choosing ViewSonic As a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Contents Compliance Information FCC Statement..................................................................................... i CE Conformity for European Countries................................................ i Declaration of RoHS2 Compliance.......................................................ii Copyright Information For Your Records................................................................................iv 1. PRODUCT OVERVIEW Package contents............................................
Copyright Information Copyright © ViewSonic Corporation, 2019. All rights reserved. ViewSonic and the three bird's logo are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
1. PRODUCT OVERVIEW Package contents Please take a moment to check if all the necessary items are included in the package. If anything is missing or damaged, please contact your dealer immediately.
Front view / Rear View 1 No. 1 Components USB Micro B (3.0) 2 HDMI Type A(V1.4) 3 Indicator LED 3 2 Description Outputs the converted AV content to displays like IFP (OPS), PC or NB. Inputs AV content from multimedia sources like camera, DVD player, etc. *Note1/Note2 Indicates HDMI signal status: - Blue: HDMI signal alive - None: No signal Note1: HDMI IN does not support resolutions of 480i, 576i, and 1080i. Note2: HDMI IN does not support AUDIO broadcast-quality 2ch 16bit PCM 32KHz.
2. Getting Started Warning: For your safety and the safety of your device, do not connect to a power supply before and during the setup of the external device. Connecting the IFP USB-port Connecting a source device To connect the myViewBoard Direct to the IFP display (OPS) serial USB-port: 1. Secure myViewBoard Direct first using the shared IFP display (OPS) backplane screw. 2. Use the supplied USB cable to connect myViewBoard Direct to the IFP display: a.
0 ct e 2 4 Installation Installation Getting started 3 Started Getting Model No.: VS17676 USB USB Cable Cable A/V A/V device device Computer Computer HDMI Cable HDMI Cable Caution1: Do not use the front USB ports of any interactive digital whiteboard to myViewBoard Direct App connect the myViewBoard Direct. 4 Caution2: This product does not support USB3.1.
3. Operating the myViewBoard Direct Start the IFP device & Launch myViewBoard for Windows 1. Start the IFP device. Power button 2. Launch myViewBoard for Windows.
To myViewBoard Direct display 1. When using the myViewBoard Direct, signing in to myViewBoard for Windows is not required. 2. On the myViewBoard for Windows screen, press icon to myViewBoard Direct display.
Access your microphone & camera permission 1. If the myViewBoard Direct APP is not installed, the system automatically connects to the Windows store to download the application. Select install, and then launch. See screenshot below. 2. Press “Yes” to allow myViewBoard to access your microphone and camera.
The myViewBoard Direct starts streaming video The myViewBoard Direct program launches and starts streaming video from the connected video source. myViewBoard Direct control panel (A~F) To manage the stream, use the following controls on the myViewBoard Direct control panel: A. P lay or Pause: play and pause video streaming. Note that pressing pause only pauses the video streaming to the IFP. The video source is not affected and will continue to play. B. Volume: Adjust and mute the volume. C.
D. Capture screenshot to myViewBoard for Windows: Take a screenshot of the current frame and insert it onto the myViewBoard canvas. The capture feature only works inside myViewBoard for Windows. E. Refresh: Clear failure connections and abnormal picture issues. F. Compact mode: Make the myViewBoard Direct control panel always visible on the top-right position.
Windows 10 Privacy Settings reference *Note1: For Windows 10 Privacy Settings reference.
Note1: Windows 10 Privacy Settings reference Camera on Settings > Privacy > Camera Camera: on myViewBoard Direct: on 11
Note1: Windows 10 Privacy Settings reference Microphone on Settings > Privacy > Microphone Microphone: on myViewBoard Direct: on 12
4. Troubleshooting If you experience a problem with your myViewBoard Direct, refer to the following troubleshooting guide. If a problem persists, contact the service center. The myViewBoard Direct does not start If the LED does not turn blue during device boot up: • Verify that the USB3.0 cable is fully inserted into the correct socket on the front of the myViewBoard Direct device. • Verify that the HDMI source is active, and the signal LED light is blue.
5. Other Information Specifications Item Description Processor eEver EJ511 EXPLORE EP9553E Connectors HDMI in x 1 (Type A [19-pin female]) USB 3.0 x 1 (Micro B) LED INDICATOR Signal LED: Blue LED Always on when the signal available COMPATIBILITY HDMI Input: V1.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/ Indonesia www.viewsonic.com/id/ Israel www.viewsonic.
Limited Warranty VIEWSONIC Network Media Player What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.
