Service manual

21. 1280x 720 @ 60Hz, 45kHz Yes Yes

22. 1280 x 1024 @ 60Hz, 63.4kHz Yes Yes

23. 1280 x 1024 @ 75Hz, 79.97kHz Yes Yes

24. 1600 x 1200 @ 60Hz, 75kHz Yes Yes

25. 1600 x 1200 @ 70Hz, 87.5kkHz Yes No

26. 1600 x 1200 @ 75Hz, 93.8kHz Yes No

27. 1680 x 1050 @ 60Hz, 65.3 kHz Yes Yes

28. 1680 x 1050 @ 75Hz, 82.3 kHz Yes No

Primary Presets

“1680 x 1050” @ 60Hz

User Presets

Number of User Presets (recognized timings) Available: 10 presets total in FIFO

configuration

Changing Modes

● Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding

“Auto Adjust” time

● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting

when execute “Auto Adjust”

● The monitor needs to do “Auto Adjust” the first time a new mode is detected

(see section “0-Touch™ Function Actions”)

● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank

FRONT PANEL CONTROLS AND INDICATORS

Front Panel Hardware Controls

Power Switch (Front Head) Power Control, soft Power Switch.

Power LED (Front Head) Green – ON

Orange – Active Off

Dark = Soft Power Switch OFF

Front Panel Controls (Head)

[ ] [ 1 ] [ 2 ] [▲] [▼] [;+][;-][;X]

[ ] Power

[ 1 ] Button 1

[ 2 ] Button 2

[▲] Up arrow button

[▼] Down arrow button

[;+] Volume+

[;-] Volume-

[;X] Mute

Note: Power Button, Button 1, Button 2, and

Mute Button must be one-shot logic

operation. (i.e. there should be no cycling)

Reaction Time OSD must fully appear within 0.5s after

pushing Button 1

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1