User guide

Using ViewSonic Device Manager
Managing All Your Clients
62
NOTE
• A eld marked with an asterisk is the required eld.
5. Provide the required data, and then click Save to conrm.
6. The Edit Conguration window for the prole (group conguration) appears.
NOTE
• The following steps are similar to those for creating a new setting prole. More
information, including both screenshots and notes, can be found in section “3.4.11
Creating Client Setting Proles” on page 58.
7. Use this window to edit client settings of this prole.
8. After completion, close the window.
9. The newly created setting prole is added to the Prole list.
NOTE
• If you create a new prole by copying a well-dened setting prole, only the part of
client settings is copied. The applicable scope of the original prole is not included.
10. Click to select the newly created prole, and then click Edit on the top of the Prole list.
11. Both the Prole Information and Available Clients panes appear in Management area.
12. Click
at the right top of the Available Clients pane.
13. The Select Clients window appears. A tree view of client groups and individual clients is provided in the
window for specifying the applicable scope of this setting prole.
14. Click on arrows to expand the tree and click to select the desired client group or clients.
• To select all clients under a client group, click to select the client group.
• To select multiple clients under a client group, Ctrl-click to select the desired clients.
15. After completion, click OK to conrm the selection of applicable clients.
16. Click Save in Prole Information pane to complete the specication of applicable scope.