User guide

Using ViewSonic Device Manager
Managing All Your Clients
58
3.4.11 Creating Client Setting Proles
A setting profile (group configuration) is a set of client settings shared by a group of clients. Through a setting
profile, you can remotely configure client settings in groups.
NOTE
• To have a basic understanding of client conguration, please refer to section “3.4.8
Client Settings” on page 54.
A simple picture of how to create a well-defined setting profile can be given by two steps:
Step 1: Create a set of shared client settings (group conguration)
Step 2: Specify the applicable scope of the setting prole
STEP 1: Create a set of shared client settings
To create a client setting profile (group configuration), please do the following:
1. On Thin Clients tab, click Proles to expand the Prole Group tree, and then click to select the prole group.
NOTE
• You need to select the prole group to which the new prole belongs rst. You
can use the system default (Ungrouped), and change the group at a later time if
necessary. For detailed instructions on how to create a prole group, please refer to
section “3.4.9 Creating Setting Prole Groups” on page 56.
2. Click Add on the top of the Prole list.
3. The Add window appears prompting for the name, description, applicable platform, and models.
NOTE
• A eld marked with an asterisk is the required eld.