User guide

Using ViewSonic Device Manager
Managing All Your Clients
53
3.4.7 Understanding Client Status Icons
In the client list of a client group or a filter, a client status icon is placed in front of each client to indicate the current
state of the client.
NOTE
• With lters, you can access and manage a specic set of clients quickly on ViewSonic
Device Manager. For more information on lters, please refer to section “3.4.30
Digging Out Clients with Filters” on page 94.
The status icon changes according to different states of a client. Six types of icons are available:
Understanding Client Status Icons
State Icon Description
Online
Indicates that the client is turned on at the moment.
Ofine
Indicates that the client is turned off at the moment.
Reboot needed
Indicates that you need to reboot the client for a
conguration change to take effect.
Modied
Indicates that a client conguration change has been
made on ViewSonic Device Manager and you need to
push the change to the client.
Pushed
Indicates that ViewSonic Device Manager has pushed a
conguration change to the client.
Unknown
Indicates that the managed client is now added and
managed by another instance of ViewSonic Device
Manager.
NOTE
• The icon made up of a little display with a letter L, W, or Z on its screen indicates that
the client is a Linux-based, WES-based (Windows Embedded Standard) thin client.
• A tooltip pops up as shown below if you hover your mouse pointer over an icon.