User guide

Conguring Client Settings
Editing or Adjusting an Individual Conguration
116
Edit Conguration (Thin Client) Window: SC-T35
4.4 Editing or Adjusting an Individual Conguration
On ViewSonic Device Manager, you can apply an individual configuration to a client
through the Edit Configuration window for that client. Through this window, all remotely
configurable settings can be edited, then you can push settings to the client through the
Push Settings feature.
NOTE
• In this section, we will focus on the editing/adjusting of an individual conguration
in greater detail. For general instructions on how to create an individual
conguration or on how to open the Edit Conguration window for a client, please
refer to section “3.4.14 Using Individualized Client Settings” on page 72.
NOTE
• To have a basic understanding of client conguration, please refer to section “3.4.9
Client Settings” on page 62.
• Please note that, although the Edit Conguration window for a prole (group
conguration) looks almost the same as the Edit Conguration window for a client
(individual conguration), their functions are dierent. The latter will only aect
some specic client when the conguration is applied.
To configure a setting in the Edit Configuration window (for a client), please do the
following:
1. In the Edit Conguration window for a client, click the tab to which the desired setting belongs.