User guide

Conguring Client Settings
Editing or Adjusting a Group Conguration
114
4.3 Editing or Adjusting a Group Conguration
On ViewSonic Device Manager, you can edit client settings for a group of clients through
the Edit Configuration window for a profile (group configuration). Through this window,
all remotely configurable settings can be edited, then you can push settings to the target
group of clients defined in that profile through the Push Settings feature.
NOTE
• In this section, we will focus on the editing or adjusting of a prole (group
conguration) in greater detail. For general instructions on how to create a prole
(group conguration) or on how to open the Edit Conguration window for prole,
please refer to section “3.4.12 Creating Client Setting Proles” on page 66.
• To have a basic understanding of client conguration, please refer to section “3.4.9
Client Settings” on page 62.
• Please note that, although the Edit Conguration window for a prole (group
conguration) looks almost the same as the Edit Conguration window for a client
(individual conguration), their functions are dierent. The latter will only aect
some specic client when the conguration is applied. For information on the
editing or adjusting of an individual conguration for a client, please refer to section
“4.4 Editing or Adjusting an Individual Conguration” on page 116.
To configure a setting in the Edit Configuration window (for a group configuration), please
do the following:
1. In the Edit Conguration window for a prole, click the tab to which the desired setting belongs.
Edit Conguration (Prole) Window: SC-T35