User guide

Conguring Client Settings
Conguring Service Access Settings
38
3.5.5 Conguring Advanced RDP Connection Settings
The table below provides a description of each setting item for RDP connections. Please refer to this table to
congure advanced settings and customize your SC-T45 desktop shortcuts for service access.
General Sub-tab
Server Settings
Item Description
Session Name Type in the name for Remote Desktop sessions.
Sever Address
Type in the IP address of the server/virtual machine where to deliver a Remote Desktop
session.
Connection Quality
Select the setting that best describes the quality of your network connection. Three options
are available: Very Fast (LAN), Fast (Broadband), and
Slow (Modem).
Login Settings
Item Description
Username Type in the user/account name used for authentication.
Password Type in the password of the user account used for authentication.
Domain
Type in the domain of the server.
NOTE: Leave this eld blank if the server doesn’t belong to any domain.
Common Settings
Item Description
Autostart When Startup
Select whether to open a Remote Desktop session automatically or not when the client is
started up.
On Application Exit
Select what to do when a Remote Desktop session is ended. Four options are available: Do
Nothing, Restart Application, Reboot, and Shutdown.
Option Description
Do Nothing Returns to the Windows Embedded desktop.
Restart Application Opens a Remote Desktop session again.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.