User guide

Conguring Client Settings
Conguring External Device Settings
31
3.3.4 Disabling or Enabling Attached Audio Devices
To disable/enable attached audio devices, please do the following:
NOTE
• If you disable locally attached audio devices, client users are not allowed to
perform audio playback or recording with these devices in a Remote Desktop
session.
• To perform audio playback or recording with local audio devices in a Remote
Desktop session, you need to enable locally attached audio devices here (the
Audio setting item under Devices tab) and congure audio related settings
in the RDP connection settings. For detailed instructions on how to congure
audio related settings in an RDP connection settings, please refer to section
“3.5.5 Conguring Advanced RDP Connection Settings” on page 38.
1. On ViewSonic Client Setup, click Devices > Audio.
2. Click to check/uncheck Enable System Audio Device.
3. Click Save to conrm your selection.
NOTE
• The change will not take effect until the client has been restarted.