User guide

Conguring Client Settings

Conguring External Device Settings

3.3.3 Conguring Settings for USB Storage Devices

To congure settings for USB storage devices, please do the following:

1. On ViewSonic Client Setup, click Devices > USB Storage.

2. Click the drop-down menu to select the desired setting. Three options are available: Enable USB

Storage, Read-Only Access, and Disable USB Storage.

NOTE

• If you disable locally attached USB storage devices, client users are not

allowed to use those devices in a Remote Desktop session.

• To use the locally attached USB storage devices in a Remote Desktop session,

you need to further congure the RDP (Remote Desktop Protocol) connection

settings under Applications tab. For detailed instructions, please refer to

section “3.5.5 Conguring Advanced RDP Connection Settings” on page 38.

3. Click Save to store your change.