User guide
Conguring Client Settings
Conguring System Settings
28
To congure the FBWF settings, please do the following:
1. On ViewSonic Client Setup, click System > FBWF.
2. Click the State drop-down menu to enable/disable the FBWF feature.
3. Select the desired overlay cache threshold if the FBWF feature is enabled.
NOTE
• When the used memory cache exceeds the selected threshold, cached objects
that are not currently in use will be released.
4. Click Save to conrm your selections.
5. You may need to restart the system for the change(s) to take effect.
WARNING
• You need to restart the system for switching between the FBWF enabled and
disabled states. An icon will appear in the Notication area of the Taskbar to
indicate the current FBWF state of the system. The following table provides a
description of each icon:
Icon Name Description
Green Lock
The FBWF is currently enabled. Except for changes
to ACS settings, all the other changes made to the
system in current session will not be kept after the
system restart.
Orange Lock
The FBWF state was changed and will take effect
after the system restart.
Red Lock The FBWF is currently disabled.