User guide

Conguring Client Settings

Conguring System Settings

With a System Snapshot on a USB Flash Drive

If you store the system snapshot of your client on a USB ash drive, this ash drive will enable you to return

your client to that system state.

NOTE

• For more information on how to store the system snapshot of a client on a USB

ash drive, please refer to section “3.2.6 Taking Snapshots for System Backup

and Recovery” on page 23.

To restore the system state with a snapshot on a USB ash drive, please do the following:

1. Plug the USB ash drive into a free USB port of the client.

2. Start up or restart the client.

3. During the POST (Power-On Self-Test) period, press F7 to open the Boot Device menu.

4. Select to boot from the attached USB ash drive.

5. The ViewSonic Thin Client Recovery System is launched.

6. Press Enter to continue.