User guide
Conguring Client Settings
Conguring System Settings
21
3.2.5 Updating Firmware from the Management Computer
Update Firmware allows client users to update client rmware from the remote management computer.
NOTE
• Ensure that your client has been added into a managed group under
ViewSonic Device Manager installed on a remote computer, and that you
have imported client rmware les into ViewSonic Device Manager. These are
prerequisites of this feature.
• For more information on rmware update and ViewSonic Device Manager,
please refer to the User Manual for ViewSonic Device Manager.
To update client rmware from the remote management computer, please do the following:
1. On ViewSonic Client Setup, click System > Firmware Update.
2. Under the Firmware Update section, click the Firmware Type drop-down menu to select Firmware.
The system will then automatically download the Firmware list from the remote computer.
NOTE
• For information on the option Snapshot, please refer to sections “3.2.6 Taking
Snapshots for System Backup and Recovery” on page 23 and “3.2.7 Restoring
the System State with a Created Snapshot” on page 24. You can also update
the rmware of a client with a snapshot (the system backup of a client) which
is coming from another client of the same model and is with a newer rmware
version.