User guide
Conguring Client Settings
Conguring System Settings
20
To enable the Shadow feature and set the password for remote assistance, please do the following:
1. On ViewSonic Client Setup, click System > Password.
2. Under the Shadow section, click Enable Shadow.
3. The Shadow feature is enabled and a window appears for you to set the password for remote
assistance.
NOTE
• On a remote computer, an administrator will need this password to use the
Shadow feature (remote assistance) available in the ViewSonic Device
Manager software. For more information, please refer to the User’s Manual for
ViewSonic Device Manager.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
NOTE
• When the Shadow feature is enabled, on SC-T45, the icon will appear in
the Notication area of the Task bar. If this feature is currently being performed
from a remote computer, the icon will change its color to yellow
.