User guide

Setting Up Your SC-T45
Positioning Your SC-T45
10
Step 2: Understand Your Stand / VESA Mount Kit for SC-T45
The stand for your SC-T45 is dual-purpose: it can be used as a stand or as a VESA mount kit. All screws of
different types supplied with the stand / VESA mount kit can be stored away inside the main bracket when
not needed.
Screws Stored Away insde the Bracket
The following gure shows different types of screws stored away inside the main bracket.
Screw Type Number
Description
1 2
The largest-size screws used to secure the bracket to a monitor as a VESA mount if the middle-
size screws cannot rmly secure the bracket and your SC-T45 to the monitor.
2 4
The middle-size screws used to secure the bracket to your SC-T45 and to a monitor when using
the bracket as a VESA mount.
3 1 The smallest-size screw used to secure the bracket to your SC-T45 as a stand.
Mount Holes on the Bracket
Refer to the following gure and descriptions for the VESA mount holes on the bracket.
Mount Hole
Description
1 The VESA mount holes used to secure the bracket to a monitor (only two of them will be used).
2 The VESA mount holes used to secure the bracket to your SC-T45 (only two of them will be used).
1
2
1
2
3
Dual-purpose
bracket
1
2
1
2
1
2
1
2