Service manual

2. Programming procedure
A. Normally, you received a EDID zip file of new model. You need to unzipped it.
B. There will need the following files for DDC program: (Q9 is an example)
1. DPS.EXE
2. Q9.BAT
3. Q9.DDC
4. Q9.CFG
5. Q9.DPS
C. Execute the Q9.BAT (for Q9 monitor only) from Programming PC. Below screen will display.
Fig-DDC1
Refer to Fig-DDC1; you have to select the required item if the display data was not you want.
Press 1: For year, the cursor will move to the column behind Edit Yearthan you can key in
the data you want after that press enter to exit and return. (It needs 4 numbers for
this data)
Press 2: For week, the cursor will move to the column behind Edit Weekthan you can key in
the data you want after that press enter to exit and return. (This data is within 1 ~ 53.)
Press 3: For S/N,, the cursor will move to the column behind Edit S/Nthan you can key in the
data you want after that press enter to exit and return. (This data is within 0 ~ 99999,
5 numbers max.)
28
ViewSonic Corporation Confidential
-
Do Not Copy Q9-1_Q9b-1