Service manual

Display Controls
1) MENU
Enter to the OSD adjustment menu. It also used for go back to previous menu for sub-men
u
and the change data don’t save to memory.
2) SELECT:
To confirm the current selection. It also used for go back to previous menu for sub-menu,
and the change data will be saving to memory.
If pressed when menu is not active, VOLUME is adjusted.
3) ADJUST : (RIGHT)
To scroll up in sub menu or to increase value of selected item.
If pressed when menu is not active, BRIGHTNESS is adjusted.
4) ADJUST: (LEFT)
To scroll down in sub menu or to decrease value of selected item
If pressed when menu is not active, AUTO CINFIG is adjusted.
5) POWER SWITCH:
Pushing the power switch will turn the monitor on. Pushing it again to turn the monitor
off.
6) POWER INDICATOR:
The LED will light with green color in normal on state, and will light with flash in power
saving mode.
3-1 Location of Controls
3. Front Panel Function Control Description
8
ViewSonic Corporation Confidential
-
Do Not Copy Q9-1_Q9b-1