User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Using the CEC function
- Using the 3D functions
- Controlling the projector through a LAN environment
- Using the projector in standby mode
- Adjusting the sound
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
49
Function Description
Color Mode See "Selecting a picture mode" on page 28 for details.
Brightness See "Adjusting Brightness" on page 29 for details.
Contrast See "Adjusting Contrast" on page 29 for details.
Color Temp.
See "Selecting a Color Temperature" on page 30 and "Setting a
preferred color temperature" on page 31 for details.
Advanced
Color
See "Adjusting Color" on page 30 for details.
Tint
See "Adjusting Tint" on page 30 for details.
Sharpness
See "Adjusting Sharpness" on page 30 for details.
Gamma
See "Selecting a gamma setting" on page 30 for details.
Brilliant Color
See "Adjusting Brilliant Color" on page 30 for details.
Noise Reduction
See "Reducing image noise" on page 30 for details.
Color Management
See "Color Management" on page 31 for details.
Reset Color
Settings
Returns all color settings to the factory preset values.
2. IMAGE menu