Lamp Swapping Instruction

2
5. Usethehandletoslowlypullthelamp out of the projector.
CAUTION
y Pulling it too quickly may cause the lamp to break and scat-
ter broken glass in the projector.
y Do not place the lamp in locations where water might splash
on it, children can reach it, or near ammable materials.
y Do not insert your hands into the projector after the lamp
is removed. If you touch the optical components inside, it
could cause color unevenness and distortion of the pro-
jected images.
6. Ensurethehandleisfullylaidatandlockedinplace.
7. Tighten the screws that secures the lamp.
CAUTION
y Loosen screw may cause a bad connection, which could
result in malfunction.
y Do not over tighten the screw.
8. Replace the projector’s lamp cover.
7-2
7-1
7-3