User Guide

56
Function Description
Auto Power On
Computer
Selecting Enable allows the projector to turn on automatically
once the VGA signal is fed through the VGA cable.
CEC
See "Using the CEC function" on page 39 for details.
Direct Power On
Selecting On allows the projector to turn on automatically
once the power is fed through the power cord.
Smart Energy
Auto Power Off
See "Setting Auto Power Off" on page 61 for details.
Sleep Timer
See "Setting Sleep Timer" on page 61 for details.
Power Saving
See "Setting Power Saving" on page 61 for details.
MHL Settings
Power Out
Switch power supply port between MHL, USB 1 or USB 2;
projector can only output power on one port at the same time.
If the HDMI/MHL port can't be detected, please do MHL
Reset or switch power out.
MHL Reset
Selecting Reset to reapply power after a power outage.
Audio Settings See "Adjusting the sound" on page 47 for details.
Presentation
Timer
See "Setting the presentation timer" on page 36 for details.
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Blank Timer See "Hiding the image" on page 37 for details.
Message
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
Screen Capture See "Creating your own startup screen" on page 38 for details.
My Button Sets a hotkey on remote control.
3. POWER MANAGEMENT menu
4. BASIC menu