User guide

45
Web Management
Projector Information
LAN Setting
Projector Status and Control
E-mail Setting
Security Setting
Firmware Update
Security Setting
Password
New Password
Conrm Password
Submit
Administrator
Submit
Submit
Enable
Disable
Please set your password if you enable this feature for rst-time. If password
is set, you will require to enter with your password upon you connect to the
Web Management.
E-mail Setting Page
`
E-mail Alert: You can set whether to be notied by email (Enable) or not (Disable).
`
To/Cc/From: You can enter email address of sender (From) and recipients (To/
Cc) to receive notication when an abnormality or warning occurs.
`
Out going SMTP server, User name, and Password should be provided by your
network administrator or MIS.
`
Alert Condition: You can select the abnormalities or warnings to be notied
by email. When any of the alert conditions occur, an email will be sent to the
recipients (To/Cc).
 Click the Save button to the save settings.
Security Setting Page
`
Password: Set up an administrator password to access the Web Management.
When enabling password for the rst time, set the password before enabling
it. When the password function is enabled, the administrator password will be
required for accessing the Web Management.
`
New Password: Enter new password.
`
Conrm Password: Enter password again and submit.
 Contact Service Center if you forget your administrator password.
Web Management
Projector Information
LAN Setting
Projector Status and Control
E-mail Setting
Security Setting
Firmware Update
E-mail Setting
TO
CC
From
Subject
Enable
Alert
Disable
Out going SMTP server
User name
Password
Save
Lamp warning
Lamp life reminder
Temperature warning
Alert Condition
E-mail Alert
E-mail Alert Test
@
@
@
SMTP Setting
http://www.pureglare.com.au