User Guide

• If you attempt to restart the projector right after it’s been turned off, it may not be turned

on successfully and will rerun its cooling procedure.

• When Off is selected, the Smart Restart function will be automatically turned off.

Shutting down the projector

1. Press POWER and a confirmation message

is displayed prompting you.

If you don't respond in a few seconds, the

message will disappear.

2. Press POWER a second time.

3. Disconnect the power cord from the wall

socket if the projector will not be used in an

extended period of time.

CAUTION

• To protect the lamp, the projector will not respond to any commands during the cooling

process.

• To shorten the cooling time, you can also activate the Quick Power Off function. See

"Quick Power Off" on page 37 for details.

• Do not unplug the power cord before the projector shutdown sequence is complete.