Service manual

6. Move the cursor to [Flash Loader] on the Project window of [DLP Composer Lite]. (The

[Flash Loader] screen will appear.)

7. Click [Browse] and select where the firmware [xxxxxxxxx.img] is for download.

8. Make sure [Skip Boot Loader Area] is with a check.

9. Press Menu and Power buttons constantly and then give power supply (switch power on).

Temp LED and Lamp LED will become amber. That indicates the projector is in the download

mode. At this moment, you can release these two buttons.

10. Click [Reset Bus] firstly to check if USB connects well.

11. Click [Start Download]. When the dialog box is displayed, click [Yes].

2. Put checkmark next to

[Skip Boot Loader Area] 

VALUE SETTING is 32KB

1. Click [Browse] and

select [*.img]

4. Click [Start Download]

3. Click [Reset Bus] to confirm

the USB connection is ok.

ViewSonic Corporation Confidential - Do Not Copy PJD6211