Service manual

USB Support - Installation (All Platforms)

This release includes support for a USB communications interface to DDP2 230/DDP2430

based projectors. The setup program includes the file s needed to install USB support . After

DLP Composer

™ Lite is installed, to install the USB support, choose the "Install DLP Device

USB Driver" icon under "DLP Composer

™ Lite" in your Start menu .

Follow the instruction on the screen to press any key and wait for the installation done.

And copy the file “FlashDeviceParameters.txt” into the C:\ Program Files\ DLP Composer Lite

X.X

Operating procedure

1. Connect the Projector and PC via USB cable.

2. Double-click [DLP Composer (TM) Lite 9.2]. The following screen will appear.

3. Select [Edit]/ [Preferences]/ [Communications] to check USB in [Projector Interface].

4. Set the items on the [Vendor 0x451, Product 0x2000 ] of [USB Device Identification].

5. Click [OK].

ViewSonic Corporation Confidential - Do Not Copy PJD6211